MAINTENANCE

High speed jet H

At the factory the engine is adjusted at sea level. When working at a high altitude or in different weather conditions, temperatures and atmospheric humidity, it may be necessary to make minor adjustments to the high speed jet.

CAUTION! If the high speed jet is screwed in too far, it may damage the piston/cylinder.

When test run at the factory, the high speed jet is set so that the engine satisfies the applicable legal requirements at the same time as achieving maximum performance. The carburetor’s high speed jet is then locked using a limiter cap in the fully screwed out position. The limiter cap limits the potential to adjust the high speed jet to at most half a turn.

To adjust the carburetor correctly you should contact a mechanic with access to a rev counter.

CAUTION! As the spark is cut off, the rev counter does not show speeds higher than 13600 rpm.

Correctly adjusted carburetor

When the carburetor is correctly adjusted the machine accelerates without hesitation and the machine 4-cycles a little at max. speed. It is also important that the chain does not rotate at idle. If the L-jet is set too lean it may cause starting difficulties and poor acceleration. If the H-jet is set too lean the machine will have less power, poor acceleration and could suffer damage to the engine.

Checking, maintaining and servicing chain saw safety equipment

Note! All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below we recommend you to contact our servicing dealer.

Chain brake and front hand guard

Checking brake band wear

Brush off any wood dust, resin and dirt from the chain brake and clutch drum. Dirt and wear can impair operation of the brake.

Regularly check that the brake band is at least 0.024 inch (0.6 mm) thick at its thinnest point.

Checking the front hand guard

Make sure the front hand guard is not damaged and that there are no visible defects such as cracks.

Move the front hand guard forwards and back to make sure it moves freely and that it is securely anchored to the clutch cover.

Checking the inertia brake release

With the engine turned off, hold the chain saw over a stump or other firm object. Let go of the front handle so that the bar drops towards the stump as the chain saw rotates around the rear handle.

When the bar hits the stump the brake should be applied.

32 – English

Page 31 Page 33
Page 32
Image 32
Husqvarna 455e Rancher manual High speed jet H, Correctly adjusted carburetor, Checking brake band wear
Page 31 Page 33

455e Rancher specifications

The Husqvarna 455e Rancher is a powerful and versatile chainsaw designed for homeowners and professionals alike. This robust equipment is particularly suited for cutting tasks involving firewood, felling small to medium-sized trees, and general property maintenance. Its blend of efficiency, durability, and user-friendly features makes it a popular choice among users.

One of the defining features of the 455e Rancher is its engine, which is a 55.5cc, 2-stroke gas engine that delivers significant power while maintaining a lightweight design. The engine is engineered to be fuel-efficient, allowing users to achieve more cutting time with less refueling. The chainsaw boasts a maximum power output of 3.4 horsepower, ensuring that it can handle heavier loads without straining.

Another significant innovation in the Husqvarna 455e Rancher is the X-Torq technology. This unique system lowers fuel consumption and reduces harmful emissions, making it an environmentally friendly option without sacrificing performance. The chainsaw is also equipped with a LowVib system that minimizes vibration, allowing for extended use without causing fatigue to the operator. This feature contributes to increased comfort and control, making it suitable for prolonged cutting sessions.

The chainsaw features a quick-release air filter that simplifies maintenance. This air filter system keeps debris out of the engine, ensuring optimal performance and longevity. The tool-less chain tensioning system allows users to easily adjust the chain without the need for additional tools, making it convenient and time-efficient.

Safety is a priority with the 455e Rancher, which includes several protective features. The chainsaw comes equipped with a chain brake that automatically activates in case of kickback, reducing the risk of injury. Additionally, the chainsaw's ergonomic design facilitates a secure grip, enhancing safety during operation.

Overall, the Husqvarna 455e Rancher combines power, efficiency, and safety, making it a reliable choice for various cutting tasks. Whether you're a casual user or a seasoned professional, the 455e Rancher provides robust performance and dependable features to handle your landscaping challenges effectively. Its customer-friendly design ensures that it remains a preferred choice in the world of chainsaws.
Top Page Image Contents