Husqvarna 460, 455e manual Bar and chain combinations, Technical Data

TECHNICAL DATA

Recommended original and replacement bar and chain combinations

Following is a list of recommended cutting equipment for the Husqvarna chain saw model 455 Rancher 460. The combinations of power head, bar and chain have been tested and found to be in accordance with the kickback and vibration requirements of ANSI B 175.1–2000.

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding maximum nose radius of a solid bar.

The following list is the chain saw manufacturers recommendations. There may be other combinations available, which will also achieve kickback reduction.

As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.

Bar and chain combinations

Chain saw model Husqvarna 455 Rancher 460 met the kickback performance requirements of ANSI B 175.1-2000 when tested with the combinations of bars and saw chains listed below. The saw chains Husqvarna H30, H80 and H81 are also classified as a low kickback saw chain since it met the requirements for low kickback saw chain outlined in ANSI B 175.1-2000. We recommend to use only the listed combinations of bars and chains for chain saw model Husqvarna 455 Rancher. Other chain saw models may not meet the kickback requirements when equipped with the listed bar and chain combinations.

Bar				Chain
Length, inch	Pitch, inch	Thickness of drive	Max. nose	Type	Drive link
		links, inch/mm	radius		count
13	0,325		10T		56
15	0,325		10T		64
16	0,325	1,3	10T	Husqvarna H30	66
18	0,325		10T		72
20	0,325		10T		80
13	0,325		10T		56
15	0,325		10T		64
16	0,325	1,5	10T	Husqvarna H25	66
18	0,325		10T		72
20	0,325		12T		80
15	3/8		11T		56
16	3/8	1,5	11T	Husqvarna H42	60
18	3/8		11T		68
20	3/8		11T		72

English – 39