Manuals / Husqvarna / Lawn and Garden / Tiller

Husqvarna 500RTT owner manual TINE REPLACEMENT See Figs. 22, 23, and, Service And Adjustments

Models: 500RTT

1 28

Download 28 pages 40 Kb

Page 15

TINE REPLACEMENT (See Figs. 22, 23, and 24)

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 22, 23, and 24)

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

NEW TINE

WORN TINE

FIG. 22

•To maintain the superb tilling performance of this machine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches (9 cm), they should be replaced or straightened as necessary.

•New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above.

	TRANSMISSION
	tine_3
TINE	TINE
3-1/2" MAX
(9 CM)

FIG. 23

SHARP EDGE	HAIRPIN CLIP
COUNTER
TINE
ROTATION
		HAIRPIN CLIP
	SHARP EDGES	SHARP EDGE
	SHARP EDGES
SHEAR PIN	SHARP
SHARP	SHARP
EDGE	EDGES
	SHEAR PIN

FIG. 24

15

Image 15

Husqvarna 500RTT owner manual TINE REPLACEMENT See Figs. 22, 23, and, Service And Adjustments

Contents

500RTT Owners ManualPREPARATION SAFETY RULESMAINTENANCE AND STORAGE TRAINING7-10 TABLE OF CONTENTSPRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIESOPERATOR’S POSITION See Fig. ASSEMBLYTOOLS REQUIRED FOR ASSEMBLY CONTENTS OF HARDWARE PACKFIG. INSTALL HANDLE See Figs. 3, 4, andUNPACKING CARTON See Fig. ASSEMBLYCHECK TIRE PRESSURE ATTACH CLUTCH CABLE See Fig.CONNECT SHIFT ROD See Fig. REMOVE TILLER FROM CRATEFIG. MEETS ANSI SAFETY REQUIREMENTSOPERATION KNOW YOUR TILLERTINE OPERATION - WITH WHEEL DRIVE HOW TO USE YOUR TILLERSTOPPING See Fig. DEPTH STAKE See Fig.TO TRANSPORT BEFORE STARTING ENGINETURNING OUTER SIDE SHIELDS See Fig.OPERATION TINE SHEAR PINSTILLING HINTS CULTIVATINGBEFORE EACH USE MAINTENANCELUBRICATION CHART GENERAL RECOMMENDATIONSMUFFLER CLEANINGAIR CLEANER ENGINETIRE CARE SERVICE AND ADJUSTMENTSTO ADJUST HANDLE HEIGHT See Fig. TILLERFIG. GROUND DRIVE BELT ADJUSTMENT See Fig.TO REPLACE GROUND DRIVE BELT See Fig. SERVICE AND ADJUSTMENTSFIG. TINE REPLACEMENT See Figs. 22, 23, andSERVICE AND ADJUSTMENTS FIG.SERVICE AND ADJUSTMENTS CARBURETORENGINE SPEED THROTTLE CONTROLENGINE OIL STORAGEOTHER FUEL SYSTEMTROUBLESHOOTING POINTS KEY PART NO. NO. DESCRIPTION REPAIR PARTSHANDLE ASSEMBLY KEY PART NO. NO. DESCRIPTIONPART MAINFRAME, LEFT SIDEREPAIR PARTS PARTPART MAINFRAME, RIGHT SIDEREPAIR PARTS KEY PART NO. NO. DESCRIPTIONKEY PART NO. NO. DESCRIPTION REPAIR PARTSTRANSMISSION KEY PART NO. NO. DESCRIPTIONKEY PART NO. NO. DESCRIPTION TINE SHIELDREPAIR PARTS KEY PART NO. NO. DESCRIPTIONPART TINE ASSEMBLYREPAIR PARTS PARTDECALS REPAIR PARTS3 2 1 8 6 5 7 9 KEY PART NO. NO. DESCRIPTION SECTION 4: EXCEPTIONS AND LIMITATIONS WARRANTY STATEMENTSECTION 1: LIMITED WARRANTY SECTION 3: ITEMS NOT COVERED BY THIS WARRANTYSERVICE NOTES Printed in U.S.A 532 19 42-4611.10.04 TR