Maintenance | Husqvarna 53 5RJ manual

MAINTENANCE

If the machine is low on power, difﬁcult to start or runs poorly at idle speed: always check the spark plug ﬁrst before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.5 mm. The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is ﬁtted with a suppressor.

English – 25

Image 25

Husqvarna 53 5RJ manual Maintenance

Contents

535RJ Symbols KEY to Symbols Contents Dear Customer Introduction What is what on the brush cutter? What is WHAT? Personal protective equipment General Safety Precautions Throttle lockout Machine′s safety equipment Cutting attachment guard Stop switchVibration damping system Mufﬂer Locking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Trimmer head Fitting the J-handle AssemblyAssembling the cutting equipment Fitting the guard extension Fitting other guards and cutting attachments Fitting a blade guard, grass blade and grass cutter Assembly Fuel Handling Fuel safetyFuel Mixing Fuelling Check before starting Starting and StoppingStarting and stopping Starting Stopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniques Grass clearing using a grass bladeGrass trimming with a trimmer head Trimming Sweeping Cutting Carburettor MaintenanceMufﬂer Bevel gear Cooling systemAir ﬁlter Spark plug Cleaning the air ﬁlterOiling the air ﬁlter Maintenance Maintenance Daily Weekly Monthly Maintenance schedule Technical data EC-declaration of conformity Applies to Europe only Approved accessories Type Cutting attachment guard, Art. noPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Page Page Original instructions 1154107-26