ASSEMBLY
INSTALL TRACTION DRIVE CONTROL ROD
The traction drive control rod has the long loop on the end of the spring as shown.
1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.
2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.
TRACTION DRIVE
CONTROL ROD
RUBBER
SLEEVE
| LOOP |
| OPENING |
| DOWN |
PIVOT |
|
BRACKET |
|
TRACTION DRIVE | RETAINER |
CONTROL LEVER | SPRING |
| TRACTION |
| DRIVE |
| CONTROL |
| ROD |
DRIVE |
|
CONTROL |
|
BRACKET |
|
INSTALL AUGER CONTROL ROD
The auger control rod has the short loop on the end of the spring as shown.
1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.
2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.
AUGER |
CONTROL |
ROD |
RUBBER |
SLEEVE |
CONTROL |
ARM |
LOOP |
OPENING |
UP |
AUGER |
| AUGER | |
CONTROL | RETAINER | CONTROL | |
ROD | LEVER | ||
SPRING | |||
|
| ||
|
| AUGER | |
|
| CONTROL | |
|
| BRACKET |
6
