ASSEMBLY
TO ASSEMBLE GRASS CATCHER (See Figs. 3 and 4)
1.Slide grass catcher bag over the frame. Make sure the rear handle is on top (the same side as the front handle) and the strap is on the bottom.
2.Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using.
3. Close grass catcher door.
NOTE: When fully closed, door will “snap” shut over frame and vinyl bindings.
DOOR
GRASS
CATCHER
FRAME
VINYL
BINDINGS
BAG
FIG. 4
STRAP
REAR HANDLE
TO INSTALL ATTACHMENTS
FRONT
HANDLE
DOOR
FIG. 3
Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see “TO CONVERT MOWER” in the Operation section of this manual.
5
