Cleaning, To Change Engine OIL See Fig, Muffler

MAINTENANCE

TO CHANGE ENGINE OIL (See Fig. 10)

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove engine oil cap; lay aside on a clean surface.

3.Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine.

CONTAINER

FIG. 10

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Slowly pour oil down the oil ﬁ ll spout, stopping every few ounces to check the oil level with the dipstick.

6.Stop adding oil when you reach the FULL mark on the dipstick. Wait a minute to allow oil to settle.

7.Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT over- ﬁ ll, or engine will smoke heavily from the mufﬂ er on startup.

8.Always be sure to retighten oil dipstick before starting engine.

9.Reconnect spark plug wire to spark plug.

AIR FILTER (See Fig. 11)

Your engine will not run properly using a dirty air ﬁ lter. Replace paper cartridge every 100 hours of operation or every season, whichever occurs ﬁ rst. Service air cleaner more often under dusty conditions.

1.Loosen screws and remove cover.

2.Carefully remove cartridge.

3.Clean by gently tapping on a ﬂ at surface. If very dirty, replace cartridge.

CAUTION: Petroleum solvents,such as kerosene, are not to be used to clean cartridge.Theymaycausedeterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

4. Install cartridge, then replace cover.

SCREWS

COVER

CARTRIDIGE

BASE

FIG. 11

MUFFLER

Inspect and replace corroded mufﬂ er as it could create a ﬁ re hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

ﬁrst. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOUSING FREE OF BUILT-UP GRASS AND TRASH. CLEAN THE UNDERSIDE OF YOUR MOWER AFTER EACH USE.

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean the underside of your lawn mower by scraping to remove build-up of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep ﬁ nished surfaces and wheels free of all gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the electrical system, mufﬂ er, air ﬁ lter and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

7021CP specifications

The Husqvarna 7021CP is a well-crafted lawn mower that stands out among its peers with an impressive combination of performance, durability, and user-friendly design. Perfectly suited for homeowners with medium to large yards, this push mower effectively handles various grass conditions thanks to its powerful engine and intelligent engineering.

At the heart of the Husqvarna 7021CP is a robust 160cc Honda GCV engine, known for its reliability and efficiency. This dependable engine allows for smooth operation and consistent cutting performance, ensuring that mowing is not only efficient but also less strenuous. The mower features a 21-inch cutting deck, constructed from high-quality steel to provide longevity and resistance against wear and tear. This size strikes an excellent balance, allowing for maneuverability in tighter spaces while still covering more ground quickly.

One of the standout features of the 7021CP is its adjustable cutting height. The mower offers six different cutting positions ranging from 1 to 4 inches, giving users the flexibility to choose the perfect length for their grass. This feature is crucial for maintaining a healthy lawn, allowing for optimal grass health and appearance.

The Husqvarna 7021CP incorporates a dual function of mulching and bagging. The mulching feature finely chops grass clippings and returns them to the lawn, providing essential nutrients and moisture back to the soil. For those who prefer a cleaner finish, the rear bagging option neatly collects clippings for easy disposal. Changing between the two modes is straightforward, enhancing convenience during mowing.

In terms of user comfort, the 7021CP is designed with ergonomics in mind. It features a comfortable handle with an adjustable height, ensuring that users of varying statures can find a suitable grip. The lightweight design further simplifies maneuvering, making it ideal for longer mowing sessions.

The mower also boasts easy-start technology, ensuring that users can quickly get to work without the frustrations often associated with starting gas mowers. Coupled with its sturdy wheels, typically larger in the back for enhanced traction, the Husqvarna 7021CP allows for smooth navigation across different terrains.

Overall, the Husqvarna 7021CP is a reliable, efficient, and user-friendly lawn mower, equipped with the necessary features to meet the demands of modern homeowners. With its robust engine, adjustable cutting height, and dual-function capabilities, it is a valuable addition to any lawn care toolkit.

Husqvarna 7021CP Cleaning, To Change Engine OIL See Fig, AIR Filter See Fig, Muffler, Spark Plug

Models: 7021CP