SERVICE AND ADJUSTMENTS

REPLACING BATTERY (See Fig. 36)

WARNING: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from accidental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with bolt and nut as shown. Tighten securely. Slide terminal cover over terminal.

Connect BLACK grounding cable to negative (-) ter- minal with remaining bolt and nut. Tighten securely.

Lower seat pan.

SEAT PAN

02602

TERMINAL

 

NUT

COVER

 

 

BOLT

 

 

POSITIVE

 

NEGATIVE

(RED)

 

 

(BLACK)

CABLE

 

 

CABLE

 

02603

Fig. 36

TO REPLACE HEADLIGHT BULB

Raise hood.

Pull bulb holder out of the hole in the backside of the grill.

Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 37)

Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

02778

Fig. 37

TRANSMISSION

REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and beforeoperatingthetractor. See“PURGETRANSMISSION” in the Operation section of this manual.

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and adjust- ment should not be necessary. If adjustment is necessary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

22

Page 22
Image 22
Husqvarna 917.28961 owner manual Transmission

917.28961 specifications

The Husqvarna 917.28961 is a premium riding mower designed for homeowners seeking exceptional performance and maneuverability in maintaining their lawns. Equipped with a powerful engine and innovative features, the 917.28961 ensures efficient cutting and pleasant operation, making it a popular choice among gardening enthusiasts.

At the heart of the Husqvarna 917.28961 is a reliable and robust engine that delivers ample power for tackling various terrains and grass types. With a 24 HP Briggs & Stratton engine, this riding mower has the horsepower necessary for smooth operation, even on challenging inclines. The engine is designed for optimal fuel efficiency, reducing overall running costs while maximizing mowing efficiency.

One of the standout features of the Husqvarna 917.28961 is its 54 inch reinforced cutting deck. This wide cutting deck allows for faster mowing, reducing the number of passes needed to achieve a well-manicured lawn. The deck also features a direct rear discharge system that enhances grass clipping dispersal, promoting a healthier lawn by avoiding clumping.

Maneuverability is crucial for maintaining the aesthetic appeal of lawns with obstacles and tight spaces. The 917.28961 is designed with a tight turning radius, enabling users to navigate easily around flowerbeds and trees, ensuring every inch of the yard receives care. Additionally, the mower's adjustable cutting height allows users to choose the perfect length for their grass, accommodating different seasons and growth patterns.

Another significant characteristic of the Husqvarna 917.28961 is its user-friendly controls and dashboard. The mower is equipped with an ergonomically designed seat, ensuring comfort during extended mowing sessions. The intuitive controls make it easy for anyone to operate, whether they are seasoned lawn care veterans or inexperienced beginners.

The Husqvarna 917.28961 also integrates advanced safety features such as an automatic blade brake that engages instantly when the operator leaves the seat. This feature ensures that the mower comes to a complete stop, reducing the risk of accidents.

In summary, the Husqvarna 917.28961 combines power, efficiency, and user comfort into a single mowing solution. With its impressive engine, wide cutting deck, and easy maneuverability, this riding mower is well-suited for homeowners aiming for a pristine lawn without the hassle of traditional mowing methods. Whether maintaining small or large yards, the Husqvarna 917.28961 is a reliable partner for lawn care.