Husqvarna 96043005200 Service And Adjustments, Install belt on engine pulley M, in belt keepers G

SERVICE AND ADJUSTMENTS

A

B

FIG. 17

•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F).

•Insert end of link (E) into hole in front mower bracket and secure with washer and retainer spring (J).

E

•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring.

F

J

H

C

D

FIG. 18

FIG. 19

•Install belt on engine pulley (M), in belt keepers (G).

IMPORTANT: CHECK BELT FOR PROPER ROUTING

IN ALL MOWER PULLEY GROOVES.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.

	M	F
G
R		G
Q	A
		E

B

P

C

K	D
L		FIG. 20

19