MAINTENANCE

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

The transmission fan and cooling fins should be kept clean to assure proper cooling.

Do not attempt to clean fan or transmission while engine is running or while the transmission is hot. To prevent pos- sible damage to seals, do not use high pressure water or steam to clean transaxle.

Inspect cooling fan to be sure fan blades are intact and clean.

Inspect cooling fins for dirt, grass clippings and other materials. To prevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling fins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory and fluid mainte- nance is not required for the life of the transaxle. Should the transaxle ever leak or require servicing, contact your nearest authorized service center/department.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Fig. 16)

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL..

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

 

OIL DRAIN VALVE

CLOSED

 

AND

 

LOCKED

 

POSITION

 

YELLOW CAP

DRAIN

TUBE

 

Fig. 16

Remove yellow cap from end of drain valve and install the drain tube onto the fitting.

Unlock drain valve by pushing inward and turning counterclockwise.

To open, pull out on the drain valve.

After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick. Tighten cap onto the tube securely when finished.

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. See engine manual.

AIR FILTER

Your engine will not run properly using a dirty air filter. Ser- vice air cleaner more often under dusty conditions.

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

ENGINE COOLING SYSTEM

To ensure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Ensure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

16

Page 16
Image 16
Husqvarna 960430173 owner manual Engine

960430173 specifications

The Husqvarna 960430173 is a versatile and powerful lawn mower designed for both residential and semi-professional use. With its robust construction and high-performance features, this mower is ideal for tackling a variety of lawn care tasks efficiently.

One of the standout characteristics of the Husqvarna 960430173 is its cutting system. This mower features a durable steel cutting deck that comes in various sizes, allowing users to choose the perfect width for their mowing needs. The optimally designed blades ensure a clean and precise cut, promoting healthy grass growth. Its adjustable cutting height provides flexibility, allowing users to customize the grass length according to their preferences.

Equipped with advanced technology, this model features a reliable and efficient engine that delivers powerful performance. The engine is designed for smooth operation, ensuring that the mower can handle tough conditions without compromising on power. Moreover, its fuel-efficient design reduces the frequency of refueling, making it more convenient for users.

The Husqvarna 960430173 is also designed with user comfort in mind. It boasts ergonomic handles that provide a comfortable grip, reducing fatigue during extended mowing sessions. The mower’s lightweight design facilitates easy maneuverability, allowing users to navigate around tight corners and obstacles within the yard.

Another notable feature of this mower is its innovative safety mechanisms. The mower is equipped with a blade brake system that stops the blades quickly when the user releases the handle, enhancing safety while in operation. This feature is particularly important for households with children or pets.

For those who appreciate technological advancements, the Husqvarna 960430173 offers compatibility with smart technology solutions. Certain models can be paired with Husqvarna's smart garden solutions, providing users with real-time information about their lawn care needs through a smartphone application. This feature allows for better lawn management and optimization of maintenance schedules.

In conclusion, the Husqvarna 960430173 is a powerful lawn mower that combines efficiency, comfort, and advanced technology. Its high-quality construction ensures durability, while its user-friendly features make lawn care a breeze. Whether for residential use or semi-professional applications, this mower delivers exceptional performance, making it a valuable tool for any lawn enthusiast.