To Move Forward and Backward See Fig

OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 17)

The direction and speed of movement is controlled by the motion control lever. (J)

Fig. 17

•Start tractor with motion control lever in neutral position.

•Release parking brake.

•Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 18)

The position of the attachment lift lever (A) determines the cutting height.

Fig. 18

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 19)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in prop- er position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjustmowertodesiredcuttingheight(See“TOADJUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

Fig. 19

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitat- ing or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut with attachment lift lever.

•Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES -

•disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place (See Fig. 20).

Fig. 20

LGT2554, 531 30 96-85, 96045001500 specifications

The Husqvarna 96045001500, also known as the LGT2554, is a robust lawn tractor specifically designed for homeowners seeking a versatile and efficient machine for maintaining their lawns and gardens. This model stands out due to its powerful features, advanced technologies, and user-friendly characteristics, making it a popular choice among gardening enthusiasts.

At the heart of the LGT2554 is a reliable 54-inch cutting deck, which enables quick and efficient mowing of large areas. The cutting deck is designed with a reinforced structure for durability, ensuring it stands up to regular use. With multiple cutting height adjustments, users can achieve the desired lawn finish, from a low trim to a higher cut for different grass types.

The LGT2554 is powered by a strong, air-cooled engine that provides ample horsepower, contributing to excellent performance throughout various tasks. The engine is equipped with technology that promotes a clean and efficient operation, minimizing emissions and maximizing fuel efficiency. The hydrostatic transmission allows for smooth driving and ease of operation, eliminating the need for manual gear changes, which is particularly beneficial for users navigating varied terrain.

Another highlight of the Husqvarna LGT2554 is its ergonomic design. The tractor features an adjustable seat, giving users comfort during longer mowing sessions. The steering wheel is positioned for easy handling, and the control layout is intuitive, allowing for straightforward operation even for those new to lawn tractors.

This model is also equipped with several innovative technologies. The Smart Switch™ technology simplifies the starting process, providing ease of use. The cutting deck is designed with air induction technology, ensuring grass is lifted before cutting, resulting in a clean, even cut and improved grass health.

Additionally, the LGT2554 comes with built-in compatibility for various attachments, such as baggers, mulchers, and snow blades, enhancing its utility throughout the year. The durable chassis supports heavy-duty usage and provides stability on slopes or uneven ground.

Overall, the Husqvarna 96045001500, LGT2554, exemplifies a high-quality lawn tractor that combines reliability, performance, and user comfort. Its advanced features and technologies cater to a wide range of gardening needs, making it an ideal choice for homeowners who prioritize maintaining a perfectly manicured lawn.

Husqvarna 96045001500 To Move Forward and Backward See Fig, To Adjust Gauge Wheels See Fig

Models: LGT2554 531 30 96-85 96045001500