Husqvarna 966582201 Blade Control Lever, Bypass Linkage

ContRoLs
22
8050-018
Set bypass linkages into slots on both sides
Blade Control Lever
To engage the mower blades, slowly lift the lever up
and into the the lock notch.
8058-074
Mower deck blade control lever in the disengaged position
WARNING!
No adjustments or maintenance to be
carried out unless:
the engine stopped•
the ignition key removed•
the parking brake activated•
Bypass Linkage
Transaxle bypass linkages must be engaged when
pushing or pulling the mower. The release levers are
located on each side of the rear of the unit below
the rear engine plate. See Manual Transport in the
Operation section.