operation
Cutting Height Adjustment
WARNING!
Before performing any service or adjustment checklist
•Make sure the blades and all moving parts have completely stopped.
•Turn the ignition switch to “OFF” position and remove the key.
•Remove spark plug wire.
To change the deck cutting height - hook the deck latch onto the latch pin on each side of the frame. Use the height of cut decal to find the corresponding hole for the desired height. Push the retainer pin into the correct hole in the height rod.
IMPORTANT INFORMATION
To achieve the best quality cut, the blades should be level with the ground or slightly tipped forward.
Remove spark plug wires
| 2 |
1 | 3 |
| |
| 4 |
|
1.Deck latch 2, Latch pin
3.Retainer pin
4.Height rod Height adjustment