OPERATING INSTRUCTIONS

By moving the levers an equal amount forward or back the machine will move in a straight line in that direction. FIG - 11

Movement of either lever forward will cause the right or left wheel to rotate in a forward direc- tion. To stop movement pull both levers into the neutral position.

To turn right while moving in a forward direction pull the right lever back towards the neutral position, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn left while moving in a forward direction pull the left lever back towards the neutral position, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn pull one lever back beyond neutral while holding the other slightly ahead of neu- tral. NOTE: The direction of the zero turn will be determined by which lever is pulled back beyond neutral. Thus left lever back, left zero turn and opposite for right zero turn. Use extra care when using this maneuver the machine can spin very rapidly if one lever is posi- tioned to far ahead of the other.

Blade engagement switch located on the console is engaged by pulling up on the switch and pushed down to disengage. FIG - 12

Motion Control Lever Pattern

(Right Side)

FIG - 11

The hour meter displays the total operating time and reminds of service intervals.

The meter will indicate “CHG OIL” for engine oil and “SVC” for general service at preset inter- vals.

The hour meter will reset itself at predetermined times.

Engine “CHG” will come on after the first ten

(10)hours of operation, and will stay on for one

(1)hour of operation before it will reset itself. It will come on every 99 hours thereafter, and stay on for five (5) hours of operation before reset- ting.

Mower “SVC” message will come on every 50 hours to remind to lubricate the unit, check blades and fasteners, etc. This message will stay on for two (2) hours of operation before resetting.

Choke control is located on the console. To choke engine pull knob push to release. FIG - 12

Throttle control is located on the console. Used to control engine RPM. FIG - 12

Parking brake is located on the left side of the machine and directly in front of the fuel tank. Pull the lever back to engage the brake and push lever forward to release the brake.

Key switch is located on the console. Used to start the machine. NOTE: Do not run the starter for more than 5 seconds at a time. If the en- gine will not start, wait about 10 seconds before trying again. FIG - 12

Choke

Throttle

Key Switch

Blade

Engagement

Hour Meter

FIG - 12

18

Page 18
Image 18
Husqvarna 968999189 / ZTH6123KOLA, 968999225 / ZTH7227KOB, 968999224 / ZTH6127KOB manual Operating Instructions

968999224 / ZTH6127KOB, 968999225 / ZTH7227KOB, 968999189 / ZTH6123KOLA specifications

Husqvarna has long been a trusted name in outdoor power equipment, and their ZTH series of zero-turn mowers further cements this reputation. Among the offerings are the models 968999224 (ZTH6127KOB), 968999225 (ZTH7227KOB), and 968999189 (ZTH6123KOLA), each designed to deliver exceptional performance and efficiency for both residential and commercial users.

The ZTH6127KOB is equipped with a robust 27 HP engine, providing ample power for tackling large lawns with heavy grass and uneven terrain. Its 61-inch cutting deck ensures a wide cutting path, allowing for faster mowing and reduced time spent on the job. The deck features an innovative design that optimizes airflow for cleaner cuts and better grass lift, resulting in a superior finish.

The ZTH7227KOB takes things a step further with its powerful 27 HP engine and expansive 72-inch cutting deck. This model is particularly well-suited for commercial landscapers who need to cover large areas quickly. The mower’s heavy-duty frame and reinforced components ensure durability and reliability under demanding conditions.

Meanwhile, the ZTH6123KOLA, with its 23 HP engine, offers a slightly smaller yet highly efficient option. Its 61-inch cutting deck strikes the perfect balance for homeowners and small commercial operations looking for an agile yet powerful mower. All models come equipped with intuitive controls and ergonomic seating designed for hours of comfortable operation.

Technologically, all three models boast advanced features such as electronic fuel injection, which enhances fuel efficiency and provides smoother acceleration. The Hydro-Gear transmission ensures a responsive and agile maneuverability, allowing operators to navigate tight spaces with ease. The mowers also feature easy-to-use height adjustment systems for customizing cutting heights based on grass types and conditions.

Safety is a priority, and Husqvarna has equipped these models with ROPS (Roll Over Protection System) and an automatic blade brake that enhances operator safety while in operation. Each model combines high performance, efficiency, and comfort, making them ideal choices for anyone seeking a reliable solution for lawn maintenance.

From commercial users to homeowners, the ZTH series by Husqvarna proves to be an investment in quality and performance, reaffirming the brand’s commitment to excellence in lawn care technology.