CARTON CONTENTS
UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
•Check carton contents against list. Be sure all parts are there.
TOOLS REQUIRED FOR ASSEMBLY
(2)1/2" Wrenches
(1)9/16" Wrench
(1)9/16" Socket wrench
PARTS IDENTIFICATION
COVER
ASSEMBLY
GRASS
CATCHER
CONTAINERS
CARTON CONTENTS:
3 | - Container Tops | 2 | - Straps |
3 | - Container Bottoms | 4 | - Bolts |
1 | - Upper Chute | 4 | - Nuts |
1 | - Lower Chute | 2 | - Bolts |
1 | - Catcher Mount | 4 | - Washers 5/16, flat |
1 | - Cover Assembly | 2 - Washers, support | |
2 | - Front Weights | 2 | - Nuts |
DUMP BAG
INDICATOR
CHUTE LATCH
UPPER CHUTE
LOWER CHUTELOWER CHUTE
ATTACHING
STRAPS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•Set parking brake.
•Place motion control levers in "NEUTRAL " position.
•Turn ignition key "OFF" and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
9
