BCZ3205DL / BCZ3205DW

8. Operation

CUTTING METHOD

(a)Use the front left side cutting.

(b)Guide the blade from your right to left with it tilted slightly to your left.

(c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

(d)The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object.

WARNING

•If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged.

•Turn off the engine and make sure the blade has com- pletely stop before checking the blade, and remov- ing any object got caught in.

WARNING

CONTROLLING BLADE BOUNCE

•Blade thrust can cause serious personal injury. Care- fully study this section. It is important that you under- stand what causes blade thrust, how you can reduce the chance of blade thrust and how you can remain in control of the unit if blade thrust does occur.

1. What causes blade thrust:

•Blade thrust occur when the moving blade contacts an object that it cannot cut. This contact causes the blade to stop for an instant and then suddenly move or ”bounce” away from the object that was hit. The operator can lose control of the unit and the blade can cause serious personal injury to the operator or any person nearby if the blade contacts any part of the body.

2.How you can reduce the chance of blade thrust:

a.Recognize that blade thrust can happen. By under- standing and knowing about bounce, you can help eliminate the element of surprise.

b.Cut fibrous weeds and grass only. Do not let the blade contact materials it cannot cut such as hard, woody vines and brush or rocks, fences, metal, etc.

GB-14

c.Be extra prepared for bounce if you must cut where you cannot see the blade making contact such as in areas of dense growth.

d.Keep the blade sharp. A dull blade increase the chance of bounce.

e.Avoid feeding the blade too rapidly. The blade can bounce away from material being cut if the blade is fed faster than its cutting capability.

f.Cut only from your right to your left.

g.Keep your path of advance clear of material that has been cut and other debris.

3. How you can maintain the best control:

a.Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles.

b.Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance.

CUTTING WORK (TRIMMER HEAD USAGE)

WARNING

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2.Keep the cutting attachment guard in place at all times when the unit is operated.

TRIMMING GRASS AND WEEDS

•Always remember that the TIP of the line does cut- ting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

1.Hold the unit so the head is off the ground and is tilted about 20 degrees toward the sweep direction.

2.You can avoid thrown debris by sweeping from your left to the right.

Page 13 Page 15
Page 14
Image 14
Husqvarna BCZ3205DL Cutting Method, Controlling Blade Bounce, Cutting Work Trimmer Head Usage, Trimming Grass and Weeds
Page 13 Page 15

BCZ3205DW, BCZ3205DL specifications

The Husqvarna BCZ3205DL and BCZ3205DW are premium brushcutters designed for both professional landscapers and demanding homeowners. Known for their robust construction and advanced technology, these models deliver exceptional performance for cutting through dense vegetation, overgrown grass, and tough weeds.

One of the standout features of both the BCZ3205DL and BCZ3205DW is their powerful engine. Equipped with a reliable 32cc 2-stroke engine, these brushcutters provide ample power to tackle challenging tasks while ensuring efficiency and ease of use. The optimized engine design minimizes fuel consumption and lowers emissions, adhering to modern environmental standards. This makes them not only powerful but also eco-friendly options in the market.

Both models feature a lightweight and ergonomic design, allowing users to operate them comfortably for extended periods. The padded handles and adjustable harness help distribute weight evenly, reducing strain on the user's back and arms. Additionally, the vibration-dampening technology incorporated into the design significantly decreases operational fatigue, making it easier to manage prolonged use on larger properties.

The cutting capability of the BCZ3205DL and BCZ3205DW is impressive, thanks to their dual-line trimmer head. This feature allows for efficient trimming and edging, cutting through tough grass and weeds with ease. The easy-to-load line system ensures quick line replacement, minimizing downtime. Furthermore, both models can be equipped with a range of attachments, including blades and different cutting heads, making them versatile tools for various tasks.

Another key advantage lies in the starting system. Husqvarna's unique starting technology, called Smart Start, significantly reduces the effort required to start the engine. It minimizes resistance in the starter cord by up to 40%, allowing for hassle-free starting every time. This feature is particularly beneficial for users who may be less experienced with outdoor power equipment.

In summary, the Husqvarna BCZ3205DL and BCZ3205DW are high-performance brushcutters that combine power, efficiency, and user comfort. Their advanced technologies, such as the reliable 32cc engine, ergonomic designs, and Smart Start feature, make them excellent choices for both professional and amateur users. Whether you're tackling heavy-duty landscaping projects or performing regular maintenance around your home, these brushcutters deliver results with ease and efficiency.
Top Page Image Contents