10
Technical specifications
The table below gives the technical specifications for the floor
saw . It is extremely important that you check these before:
- Choosing a floor saw .
- Choosing and fitting a diamond blade.
- Connecting to the mains supply.
- Choosing a power cable.
- Choosing the cutting depth.
- Transporting the machine.
If you are unsure about the meaning of the technical specifica-
tions or ordering spare parts, please contact your supplier.
FS 1000 EM ART. NO. 50040
Motor rating kw 11
V oltage and type of supply V/phase/Hz 400/3/50 or
220/3/50
Power cable REVE 5x6
Polarity Europa plug 32 Amp.
Phase inverter separate knob
Drive shaft speed rpm 965
Max. peripheral speed. m/s 63
Max. diamond blade diameter mm 1000
Parking brake yes
Base plate equipment standard
Chain drive equipment standard
Max. Cutting depth mm 420
Length approx. mm 1750
Width approx. mm 780
Height approx. mm 1120
Weight (excl. blade) approx. kg 275
Noise noise power Lw <101.7
rel. pw according
to ISO 744 dB(A)
Noise noise pressure <84.8
Lp rel. 0µPa at
ear during
operation B(A)
Vibration according to 0.8 m/s2 (H/A)
ISO 7505
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _