TRACTOR - - MODEL NO. GTH263T (96041022600), PRODUCT NO. 960 41
MOWER DECK 44
KEY | PART |
| KEY | PART |
|
NO. | NO. | DESCRIPTION | NO. | NO. | DESCRIPTION |
1 | 532 40 | Deck Weldment Mower | 50 | 817 49 | |
2 | 532 17 | Plug Hole Mandrel | 52 | 532 19 | |
6 | 532 43 | Cover Mandrel LH | 54 | 872 11 | |
7 | 532 43 | Cover Mandrel RH | 97 | 532 17 | |
8 | 532 19 | Blot/Washer Asm | 98 | 532 19 | Spring Drive |
11 | 532 18 | Blade High Lift | 113 | 872 11 | |
12 | 532 40 | Rod | 114 | 532 19 | |
13 | 532 18 | Shaft Asm. w/Lower Bearing | 116 | 532 19 | Bolt, Shoulder |
14 | 532 18 | Housing, Mandrel | 117 | 532 17 | Gauge Wheel |
15 | 532 11 | Bearing, Ball, Mandrel | 120 | 819 13 | |
16 | 819 13 | Washer 13/32 x 13/16 x 12 Ga. | 122 | 532 18 | |
17 | 872 11 | Bolt | 185 | 873 90 | |
18 | 872 14 | Bolt RdHd | 187 | 532 19 | Stud Fastener w/"D" |
19 | 532 19 | Pin Cotter 5/16 Bow Tie Lock | 188 | 873 90 | |
20 | 532 17 | Baffle Vortex | 189 | 532 19 | |
21 | 873 68 | Nut, Crownlock | 190 | 532 19 | Bolt Shoulder |
22 | 532 17 | Stripper Mandrel | 194 | 874 49 | |
24 | 532 10 | Cap Sleeve | 241 | 532 15 | |
25 | 532 17 | Spring, Torsion | 242 | 532 41 | Port Washout |
26 | 532 11 | Nut, Push | 243 | 532 43 | |
27 | 532 41 | Deflector Shield | 245 | 532 43 | Kit Bungee (Includes Phillips head |
29 | 532 13 | Rod, Hinge |
|
| screw, weld nut, screw, bungee |
30 | 532 17 | Screw, Thdroll Washer Head |
|
| latch, and bungee strap) |
31 | 532 18 | Washer, Spacer Mower Vented | - - - | 532 18 | Mandrel Assembly (Includes hous- |
32 | 532 15 | Pulley, Mandrel |
|
| ing, shaft assembly, and bearing |
33 | 532 40 | Nut, Flg. Top Lock |
|
| only - pulley/nut/washer and blade |
39 | 532 19 | Pulley, Idler |
|
| bolt/washers not included) |
43 | 532 19 | Arm, Idler | - - - | 532 44 | |
47 | 532 19 | Belt Deck Drive | NOTE: All component dimensions given in U.S. inches | ||
48 | 532 19 | Pulley Idler | |||
49 | 873 90 | Nut, Lock Flg. |
| 1 inch = 25.4 mm |
15