Husqvarna H348SL SUPPORT ASSEMBLY See Fig, CONTAINER MOUNTING See Fig, Mounting Cover Assembly To

Models: H348SL

1 10

Page 6

2	MOUNTING COVER ASSEMBLY TO
	SUPPORT ASSEMBLY (See Fig. 2)

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to tractor.

1.Position cover assembly on ground behind tractor.

2.Lift and rotate cover to align cover brackets with support assembly tubes.

3.Slide cover assembly down onto the support tubes.

1.Install one container to left side ﬁ rst. Install another container to center position and one in right position.

NOTE: Left edge of right container should always overlap right edge of left container at center supports.

2.Close cover and lock latches over center support tubes. To lock and release latches, pull back on latch handles.

COVER ASSEMBLY

SUPPORT

ASSEMBLY

03024

FIG. 2

COVER LATCH HANDLES

FIG. 3

Image 6

Contents

Assembly Operation Customer Responsibilities Repair Parts Grass CatcherI. GENERAL OPERATION SAFETY RULESSafe Operation Practices for Ride-On Mowers II. SLOPE OPERATIONIV. TOWING TABLE OF CONTENTSV. SERVICE SAFETY RULESKNOW YOUR GRASS CATCHER TOOLS REQUIRED FOR ASSEMBLYCARTON CONTENTS COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWERDRAWBAR A See Figs. 1A, 1B & 1C ASSEMBLY1 BAGGER SUPPORT ASSEMBLY DRAWBAR B See Fig. 1DSUPPORT ASSEMBLY See Fig 3 CONTAINER MOUNTING See FigMOUNTING COVER ASSEMBLY TO 6 LEVEL MOWER DECK 4 LOWER CHUTE See Fig5 UPPER CHUTE See Figs. 5A and 5B FIG. 5AOPERATION TIPS FOR IMPROVED BAGGING OPERATIONSTORAGE CUSTOMER RESPONSIBILITIESGENERAL RECOMMENDATIONS BLADE CAREREPAIR PARTS GRASS CATCHER - MODEL NUMBER H348SL PRODUCT NO. 960