SAFETY INSTRUCTIONS
Switch lock
The switch lock is designed to prevent accidental operation of the switch. When the lock (A) is pressed in this releases the switch (B).
A
B
The switch lock remains pressed as long as the switch is pressed. When you release your grip on the handle this resets both the switch and the switch lock. This takes place via two independent return spring systems. This position causes the machine to stop and the switch to be locked.
Guard for the blade
This guard is fitted above the cutting blade and is designed to prevent parts of the blade or cutting fragments from being thrown towards the user.
Checking, maintaining and servicing the machine′s safety equipment
WARNING! All servicing and repair work on
!the machine requires special training.This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.
Checking the starting and stopping functions of the switch
Start the machine, release the switch, and check that the machine and blade stop.
Checking the switch lock
Check that the switch is locked when the switch lock is in its home position.
Press the switch lock and check that it returns to its home position when released.
Check that the switch and switch lock move freely and that their return spring systems function.
Start the machine, release the switch, and check that the machine and blade stop.
Checking the blade guard
WARNING! Always check that the guard is
!correctly fitted before starting the machine. Check that the cutting blade is fitted correctly and does not show signs of damage. A damaged cutting blade can cause personal injury. See instructions under the heading Assembly.
Check that the guard is complete and without any cracks or deformations.
General safety precautions
•A power cutter is designed to cut hard materials, such as masonry. Observe the increased risk of kickback when cutting soft materials. See instructions under the heading How to avoid kickback.
•Do not use the power cutter until you have read the entire contents of this Operator’s Manual.
All servicing, in addition to the points listed in the section ”Control, maintenance and service of the power cutter’s safety equipment”, should be carried out by trained service specialists.
•Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your
6 – English
