OPERATION

TO OPERATE MOWER (See Fig. 7)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT LE-

VER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 7

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER

ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Pull up and remove oil fill cap/dipstick; wipe oil off. Re- insert the dipstick into the tube and push down firmly into place. Remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

12

Page 12
Image 12
Husqvarna LT1536 owner manual Before Starting the Engine

LT1536 specifications

The Husqvarna LT1536 is a versatile and efficient lawn tractor designed for homeowners seeking a reliable solution for their yard care needs. This model combines advanced technology with user-friendly features, making it an excellent choice for maintaining medium to large-sized lawns.

One of the standout features of the LT1536 is its powerful 15-horsepower engine. This reliable engine provides ample power for cutting grass effectively, allowing the tractor to tackle tough mowing conditions with ease. The engine also adheres to stringent emissions regulations, ensuring that it operates with minimal environmental impact.

The cutting deck of the LT1536 is designed for precision and efficiency. With a 36-inch cutting width, users can cover a larger area in less time. The deck features a robust design, allowing for a clean and even cut while preventing clumping and ensuring a healthy lawn. The cutting height is easily adjustable, enabling users to customize the cut according to their lawn's needs. This flexibility helps cater to various grass types and seasonal changes, promoting a lush and vibrant yard.

Husqvarna prioritizes user comfort and convenience in the LT1536. The tractor boasts an ergonomic seat and easy-to-reach controls, ensuring that users can operate the mower with minimal strain. Additionally, the compact design allows for easy maneuverability around obstacles such as trees and flower beds, enhancing the overall mowing experience.

This model is equipped with Husqvarna's innovative technology, including the Ready Start system, which makes starting the engine a hassle-free process. The automatic choke eliminates the need for manual adjustments, allowing for a straightforward and reliable start-up each time. Moreover, the LT1536 features a durable and sturdy frame, built to withstand the rigors of mowing while ensuring longevity.

For those seeking versatility, the LT1536 accommodates a range of optional accessories like grass collectors and mulching kits, making it adaptable to different lawn care tasks. Whether you need to bag clippings, mulch leaves, or simply mow, this lawn tractor provides the flexibility to handle various challenges.

In conclusion, the Husqvarna LT1536 is an excellent investment for homeowners looking for a reliable, efficient, and easy-to-use lawn tractor. With its powerful engine, advanced cutting deck design, and user-friendly features, it stands out as a premier choice in the world of lawn care equipment, making yard maintenance both manageable and enjoyable.