![](/images/new-backgrounds/1111432/1114323x1.webp)
KEY TO SYMBOLS
Key to symbols
WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
•Approved hearing protection
Never use the machine if persons, especially children or pets, are in the immediate vicinity.
Watch out for thrown objects and ricochets.
Warning: rotating cutter. Keep hands and feet clear.
This product is in accordance with applicable EC directives.
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.
The engine is stopped.
Drive position
Neutral
2 – English
Other symbols/decals on the machine refer to special certification requirements for certain markets.
Always wear protective gloves.
Regular cleaning is required.
Visual check.
The ignition lead should always be removed from the spark plug before repair, cleaning or maintenance work.
Switch off the engine by releasing the engine brake handle before carrying out any checks or maintenance.
Steps before using a new lawn mower
•Please read the operator’s manual carefully.
•Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.
•Fill with fuel and oil in the engine. A container with sufficient oil quantity is supplied with the machine. See the instructions under the heading fuel handling.
WARNING! Under no circumstances may the
!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories.
WARNING! A lawn mower is a dangerous
!tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this operator's manual.
WARNING!
!engine's exhaust fumes can represent a health hazard.
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.