OPERATION
Weak Battery
If the battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance
section.)
WARNING!
IMPORTANT INFORMATION
The mower is equipped with a
Jumper Cables Use |
|
1. Connect each end of the RED cable to the |
|
POSITIVE (+) terminal on each battery, taking | |
care not to short against chassis. | Jumper cable connection |
2.Connect one end of the BLACK cable to the NEGATIVE
3.Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.
To remove cables, reverse order
4.Remove BLACK cable first from chassis and then from the fully charged battery.
5.Remove RED cable last from both batteries.
29