OPERATION

7. Open the fuel tank valve.

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is an odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

8.Press in and turn the ignition key to the start position.

IMPORTANT INFORMATION

Do not run the starter for more than 5 seconds each time. If the engine does not start, wait about 10 seconds before retrying.

IMPORTANT INFORMATION

The Briggs & Stratton engine on this unit is equipped with Electronic Fuel Management (EFM). The engine choke is automatically regulated during starting and warm up.

9.When the engine starts, immediately release the ignition key back to the run position.

10.Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle”, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING.

8065-013

Fuel valve in the OPEN position

80658-050

Turn to the START position

8066-008

Release ignition to the RUN position

27

Page 27
Image 27
Husqvarna MZ5225ZT / 966690501, MZ6128ZT / 966613101 manual Open the fuel tank valve