OPERATION
7.Push foot pedal fully forward for transport position. Set pin at desired cutting height. (Height selection pin is removed by rotating 180O.) Make sure that the pin is inserted fully through the both sides of the height panels.
The following conditions must be fulfilled before the engine can be started:
•The blade switch for engaging the mower blades must be depressed.
•The parking brake must be on.
•Both steering controls must be in the locked (outer) neutral position.
Starting the Engine
1.Sit on the seat.
2.Raise the mower deck to the transport position by setting the lift pedals fully forward.
3.Activate the parking brake.
4.Disengage the mower blades by pressing the blade switch downwards.
Set deck to selected cutting height
Set mower deck to the transport position
Press the control for disengaging the mower deck
28
