Husqvarna PZ6034FX / 966516801, PZ6029PFX / 966062201 Fuses, Choke Control, Cutting Height Pedals

CONTROLS

Fuses

Fuses are located on the right hand side of the machine. They are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles.

There are three fuses with ratings and functions:

1.20 A, Primary fuse.

2.7.5 A, Mower deck coupling.

3.10 A, Accessories

Choke Control

Gas models only - The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.

For cold starts the control should be pulled out to its extent.

Cutting Height Pedals

The cutting height pedals release the deck lift to allow setting the desired deck height. Apply pressure to the lift pedal and rotate foot to also apply pressure to the release pedal, unlocking the deck lift.

For transport, push the lift pedal fully forward until the deck lift latches in the transport (highest) position.

8011-420

Fuses

8065-004

Choke control

2

1

8065-017

1.Lift pedal

2.Release pedal

Cut height selection pedals

24