Description of the cooker hood
The cooker hood
Motorhouse
Work light
Duct
Grease filter
Control panel
Accessories
The following are included with the cooker hood:
•Template for mounting: Template for mounting on wall and under cupboard (printed on packaging).
•Mounting set: 4 pcs 4x60 mm screws, 4 pcs 5x30 mm screws, 4 pcs M5x30 mm screws, 4 pcs 5,3x15 mm washers, 4 pcs 5,3x10 mm washers, 4 pcs M5 mm nuts, 4 pcs spacers, 4 pcs 10 mm wall dowels, 4 pcs locknuts, 4 pcs plastic covers, 2 pcs brackets.
•Cold air valve.
•Instruction book.
Following is ordered from retailer:
•Venting kit: When the cooker hood is to be connected to an evacuation channel use the venting kit containing one ventilation pipe, one roof connecting metal flange and two clamps.
PNC 391 414 201.
•LONG LIFE carbon filter: The carbon filter is to be used when the hood is connected to the recirculation system.
For new installations:
PNC 391 834 201 (50 cm), 391 834 200 (60/70 cm). Replacements (after approx. 3 years):
PNC 391 837 001 (50 cm), 391 837 000 (60/70 cm).
•Venting grid: Venting grid for recirculation. PNC 391 433 101.
Functions
There are two possible systems:
•Extraction of air to outside using optional venting kit and evacuation duct.
•Recirculation using optional carbon filter.
The cooker hood cannot be connected to flues of other appliances that run on energy sources other than electricity. Please, keep to the provisions of official directives regarding the question of fumes discharge.
Use the carbon filter. When you use the carbon filter, the air is purified within the cooker hood and recirculated back into the room, so heated air is not lost. It can be a good idea to use the carbon filter in winter and normal air extraction to a duct in summer.
32
