OPERATION
Starting the Engine
1.Sit on the seat.
2.Raise the mower deck by pushing the release button on the top of the lifting lever. Pull the lifting lever backward to the locked (transport) position.
3.Activate the park brake by pushing the release button in and pulling the lever fully upwards.
4.Disengage the mower blades by pressing the blade switch downwards.
5.Move the steering controls outward to the locked (outer) neutral position.
6.Move the throttle lever to the full throttle position.
NOTE: There is a detent at the full throttle position to aid in setting the control.
7.If the engine is cold, pull the choke control up.
8.Press in and turn the ignition key to the start position.
9.When the engine starts, immediately release the ignition key back to the run position. Push the choke control in gradually when the engine has started.
10.Set the engine speed with the throttle. Allow the engine to run at a moderate speed, approximately mid throttle, for a short time before use.
11.USE FULL THROTTLE WHEN MOWING.
IMPORTANT INFORMATION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying.
17
