LUBRICATION
Engine Oil Levels
Check the oil level in the engine when the machine is standing level and the engine is stopped.
Remove the dipstick, wipe it clean, and then replace it. The dipstick should not be screwed into place.
Take the dipstick out again and read the oil level.
The oil level should lie between the markings on the dipstick. If the level is approaching the “ADD” mark, fill the oil to the “FULL” mark on the dipstick.
Never fill to above the “FULL” mark.
The oil is filled through the hole for the dipstick.
Engine oil SAE 30 or
Over 68°F / +20° SAE 40 can be used.
Use engine oil SAE
The engine holds 1.6 qt (1.7 liters) of oil excluding the filter, including filter 1.7 qt (1.9 liters).
40 - Husqvarna
15 |
Remove the dipstick
Dipstick markings
Dipstick markings