MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See “TO CHECK BRAKE” in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See PSI on tires).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OP- ERATION SYSTEM (ROS)

Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position.

CHECK OPERATOR PRESENCE SYSTEM

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

ROS "ON" Position

Engine "ON" Position

(Normal Operating)

 

02828

CHECK REVERSE OPERATION (ROS) SYSTEM

When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should shut off the engine.

When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch en- gaged, any attempt by the operator to shift into reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be sharp. Replace worn, bent or damaged blades.

CAUTION: Useonlyareplacementblade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL (See Fig. 13)

Raise mower to highest position to allow access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

Remove blade bolt by turning counterclockwise.

Install new blade with stamped "GRASS SIDE" facing the ground.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

Install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

IMPORTANT: Special blade bolt is heat treated.

BLADE

 

MANDREL

 

 

ASSEMBLY

 

CENTER

 

 

HOLE

 

BLADE BOLT

 

 

(SPECIAL)

02

544

 

 

 

 

 

STAR

FIG. 13

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

Remove terminal guard.

Disconnect BLACK battery cable first then RED bat- tery cable and remove battery from tractor.

15

Page 15
Image 15
Husqvarna YTH1542XPT owner manual Tractor, Brake Operation, Tires, Blade Care, Battery

YTH1542XPT specifications

The Husqvarna YTH1542XPT is a versatile and powerful riding mower designed for homeowners who seek efficiency and superior performance while maintaining their lawn. This model is equipped with several innovative features and technologies that make lawn care easier and more enjoyable.

At the heart of the YTH1542XPT is a sturdy 15 horsepower Briggs & Stratton engine that delivers reliable starting and performance. The engine is paired with a hydrostatic transmission, allowing for smooth and precise speed adjustments without the need for manual gear shifting. This feature provides an easy driving experience, making it ideal for navigating around obstacles and tight spaces in your yard.

The YTH1542XPT boasts a robust 42-inch cutting deck, which is ideal for efficiently covering ground while still providing a clean and even cut. The cutting deck is designed with three different cutting heights, easily adjustable from the operator's seat, enabling users to achieve their desired grass height quickly. The air induction mowing technology also enhances grass lift, ensuring that clippings are cut evenly before being discharged – either side-discharged or mulched using an optional kit.

Furthermore, the Husqvarna YTH1542XPT features an ergonomic seat and steering wheel, ensuring comfort during extended mowing sessions. The easy-access controls allow users to engage the blades, adjust the deck height, and control speed effortlessly, all of which contribute to an enjoyable mowing experience.

In terms of build quality, the robust steel frame provides durability and stability, ensuring the lawn tractor can withstand tough terrains and conditions. The large rear wheels offer excellent traction and maneuverability on varying surfaces, while the front wheels provide an unobstructed view that makes it easier to navigate tight corners.

The YTH1542XPT also stands out with its cutting-edge technology. The compact and efficient design not only conserves space in your garage but also optimizes fuel efficiency, allowing users to mow larger areas with fewer refueling interruptions.

In summary, the Husqvarna YTH1542XPT is a reliable riding mower packed with features designed for efficiency, comfort, and ease of use. Whether tackling a small yard or a larger property, its powerful engine, adjustable cutting deck, and ergonomic controls make it an excellent choice for homeowners who value quality and performance in their lawn care tools.