Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna YTH1848XPT To Replace Mower Blade Drive Belt See Fig, Mower Drive Belt Removal

Models: YTH1848XPT

1 44
Download 44 pages 31.58 Kb
Page 21
Image 21

SERVICE AND ADJUSTMENTS

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if neces- sary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 26)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

•If adjustment is necessary, see steps in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

 

02966

A

A

FIG. 26

FRONT-TO-BACK ADJUSTMENT (See Figs. 27 and 28) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

02548

BB

FIG. 27

B

A

Tighten adjust nut

Loosen adjust nut

B to raise mower

B to lower mower

02950

Loosen jam nut A first

FIG. 28

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 29)

MOWER DRIVE BELT REMOVAL

•Park tractor on a level surface. Engage parking brake.

•Lower attachment lift lever to its lowest position.

•Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

•Remove screws (P) from mandrel covers (Q) and re- move covers.

•Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

•Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (S).

21

Page 20 Page 22
Page 21
Image 21
Husqvarna YTH1848XPT owner manual To Replace Mower Blade Drive Belt See Fig, Mower Drive Belt Removal
Page 20 Page 22

YTH1848XPT specifications

The Husqvarna YTH1848XPT is a powerful and versatile lawn tractor designed to meet the needs of homeowners with expansive lawns or those who demand more from their mowing equipment. This model combines innovative features, advanced technology, and user-friendly characteristics to provide an exceptional mowing experience.

One of the standout features of the YTH1848XPT is its robust 18.5 HP Briggs & Stratton engine. This powerful engine ensures reliable performance, enabling the mower to tackle various terrain types efficiently. The engine is paired with a smooth hydrostatic transmission, allowing for easy speed adjustments and seamless operation without the need for shifting gears. This can significantly reduce the effort required for mowing and increase overall productivity.

The cutting deck on the YTH1848XPT is 48 inches wide, allowing for a quicker mowing time over larger areas. It is built for durability and features an efficient design that provides a clean, even cut. The deck can easily be adjusted to multiple cutting heights, ranging from 1 to 4 inches, allowing users to customize their mowing height based on their lawn’s specific requirements.

Further adding to its functionality, the YTH1848XPT is equipped with a robust chassis that enhances stability and handling. Its tight turning radius makes maneuvering around obstacles like trees and flower beds hassle-free. Additionally, the ergonomically designed seat provides comfort during extended mowing sessions, reducing operator fatigue.

Technologically, the YTH1848XPT comes with several advanced features that improve the mowing experience. The intuitive dashboard provides essential information at a glance, including fuel level, engine temperature, and service reminders. The mower also features a user-friendly cutting deck washout port, making deck cleaning simple and helping to maintain optimal performance.

Overall, the Husqvarna YTH1848XPT stands out as an efficient and user-friendly lawn tractor, suitable for homeowners who want to maintain their lawns with precision and ease. Its combination of powerful performance, advanced features, and thoughtful design ensures that it remains a reliable choice for those looking to invest in quality lawn care equipment. Whether tackling a small yard or expansive property, the YTH1848XPT delivers results that meet high expectations.