SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 30)

MOWER DRIVE BELT REMOVAL

Park tractor on a level surface. Engage parking brake.

Lower attachment lift lever to its lowest position.

Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (V).

MOWER DRIVE BELT INSTALLATION

Install belt around all mandrel pulleys (R) and around idler pulleys (V) as shown.

Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

Raise attachment lift lever to highest position.

V

M

R

R

Fig. 30

TO REPLACE MOTION DRIVE BELT (See Fig. 31)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Disconnect clutch wire harness (A).

Remove anti-rotation link (B) on right side of tractor.

Remove belt from stationary idler (C) and clutching idler (D).

Remove belt from centerspan idler (E).

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F).

Remove belt downward from engine pulley and around electric clutch (G).

Slide belt toward rear of tractor, off the steering plate

(H) and remove from tractor.

BELT INSTALLATION -

Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J).

Pull belt toward front of tractor and roll belt around electric clutch and onto engine pulley (G).

Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (F). Be sure belt is inside the belt keeper.

Install belt on centerspan idler (E).

Install belt through stationary idler (C) and clutching idler (D).

Reinstall anti-rotation link (B) on right side of tractor. Tighten securely.

Reconnect clutch harness (A).

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” section in this manual).

 

G

B

H

 

 

A

 

C

 

J

 

D

 

E

 

F

 

02953

 

electric

21

Fig. 31

Page 21
Image 21
Husqvarna YTH22V46XLS owner manual To Replace Mower Blade Drive Belt See Fig, To Replace Motion Drive Belt See Fig

YTH22V46XLS specifications

The Husqvarna YTH22V46XLS is a versatile and powerful lawn tractor designed to make mowing your lawn an efficient and enjoyable task. With its robust features and advanced technologies, this tractor stands out in the crowded market of garden equipment.

At the heart of the YTH22V46XLS is a 22 HP Kohler engine, which provides reliable power and performance. This engine, known for its durability and fuel efficiency, allows users to tackle even the toughest mowing challenges with ease. The automatic transmission makes operation smooth, enabling seamless transitions between speeds without the need for manual shifting.

One of the prominent features of the YTH22V46XLS is its 46-inch cutting deck, designed for precision and efficiency. This deck provides a wide cutting path, enabling users to cover more ground in less time, while the seven cutting height positions allow for customization based on specific lawn requirements. The deck is also equipped with a washout port, making maintenance simpler and helping to keep the underside clean from grass clippings.

Maneuverability is another key characteristic of the YTH22V46XLS. With an ergonomic design and a tight turning radius, this lawn tractor can easily navigate around flower beds, trees, and other obstacles in your yard. The front-mounted headlights enhance visibility during early morning or late evening mowing sessions, making this tractor a practical choice for any lawn care enthusiast.

Husqvarna has also integrated several innovative technologies into the YTH22V46XLS to improve user comfort and functionality. The step-through chassis design ensures easy access to the seat, reducing strain on the back during entry and exit. Additionally, the comfortable seat, complete with armrests, provides support during long mowing sessions.

For users who prefer a more tailored mowing experience, the YTH22V46XLS features the ability to attach various accessories such as a bagger or mulching kit. This flexibility allows owners to optimize their mower for specific tasks, whether they want to collect clippings or finely chop grass to return nutrients to the soil.

In summary, the Husqvarna YTH22V46XLS embodies a perfect blend of power, efficiency, and comfort, making it an ideal choice for homeowners looking to maintain their lawns with ease. Its advanced features and technologies deliver an exceptional mowing experience that meets the demands of both small and large lawns alike.