Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna YTH2454T To USE Cruise Control -J See Fig, To Adjust Mower Cutting Height See Fig

Models: YTH2454T

1 44
Download 44 pages 37.73 Kb
Page 13
Image 13

OPERATION

J

K

L

FIG. 17

TO USE CRUISE CONTROL -J (See Fig. 17)

The cruise control feature can be used for forward travel only.

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 18)

The position of the attachment lift lever (A) determines the cutting height.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 19)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

A

FIG. 18

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

FIG.19

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield (S) in place.

13

Page 12 Page 14
Page 13
Image 13
Husqvarna YTH2454T owner manual To USE Cruise Control -J See Fig, To Adjust Mower Cutting Height See Fig, To Operate Mower
Page 12 Page 14

YTH2454T specifications

The Husqvarna YTH2454T is an exceptional riding lawn mower designed to provide both efficient performance and comfort for homeowners with larger lawns. With a powerful engine and a range of innovative features, this machine stands out as a reliable option for residential lawn care.

At the heart of the YTH2454T is a robust 24 horsepower Briggs & Stratton V-Twin engine. This reliable power source ensures smooth operation and ample power for tackling any mowing task. The engine's design allows for increased durability and reduced vibration, making mowing a more enjoyable experience. The hydrostatic transmission provides effortless speed control, allowing the operator to maintain a consistent pace while moving forward or in reverse, without the need for shifting gears.

One of the standout characteristics of the YTH2454T is its 54-inch cutting deck, which enables the mower to cover large areas efficiently. The deck is designed with a stamped, reinforced steel construction, providing durability and longevity. The cutting height can be easily adjusted from 1.5 to 4 inches to suit different grass types and conditions, ensuring a clean and precise cut every time.

Husqvarna has incorporated innovative technologies to enhance the user experience. The air induction mowing technology improves grass lift and guarantees an even cut, while the deck wash port allows for easy cleaning of the mower deck after use. The ergonomic steering wheel and comfortable seat reduce operator fatigue, even during extended mowing sessions.

Additionally, the YTH2454T features an integrated mulching capability, enabling the mower to finely chop grass clippings and return them to the lawn, enriching the soil and promoting healthy growth. The easy-access controls make it user-friendly, ensuring that both novice and experienced users can operate it with ease.

With a tight turning radius of 16 inches, the Husqvarna YTH2454T excels in maneuverability, allowing it to navigate around landscaping, trees, and flower beds with minimal effort. This combination of power, comfort, and advanced features makes the YTH2454T a top choice for homeowners looking for a reliable and efficient riding mower. Whether maintaining a sprawling lawn or tackling rough terrain, the Husqvarna YTH2454T proves to be an excellent investment for achieving a beautifully manicured yard.