P/N 374511B
Page 2
PROTOCOL™ | Hand Held Device |
|
The Hussmann Interface Module may be operated from either battery power or from a 120V/12VDC transformer. When using the transformer, connect Module before plugging in the transformer. The startup screen will automatically appear.
HUSSMANN
INTERFACE MODULE
(C)1991 HUSSMANN CORPORATION
VER 1.30
When battery operated, the Module will shut down if the key pad has not been used for three minutes. When a transformer is used, the hand held module will beep and remain on.
If the battery is too weak to function, the menu screen will become faint or not come up at all. If the battery is completely without power, the hand held module will beep and show an alarm message. There is also a Low Battery message that appears at the Main Menu for Protocol™.
Regardless of the power source, if Protocol™ is not communicating with the hand held module, a beep will sound and a COMM ERROR message will appear. If the Protocol™ system is without power , the hand held module will beep and show an ALARM message.
HUSSMANN CORPORATION • BRIDGETON, MO | 970307 |