OPERATION
Safe Operating Practices
This product is capable of amputating hands and feet and throwing objects. Always follow all safety instructions to avoid serious injury or death.
Operation
Always keep safety shields and covers in place, except for servicing. Follow daily and weekly checklists, making sure hoses are tightly secured and bolts are tightened.
Always inspect machine for damage after striking a foreign object. If damage is found, repair machine immediately. Be sure to stop on level ground, place park brake lever in the brake engaged position, place the PTO lever in the “OFF” position, lower attachment, remove ignition switch key before leaving operator’s seat to inspect damage. Never turn the PTO switch on unless the PTO shaft is securely con- nected to a power driven attachment.
Never operate a poorly maintained machine.
Always operate machine in daylight or with adequate workinglights. Never put hands or feet under any part of the machine while it is run- ning.
Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Always disengage the blades and wait for them to stop before crossing gravel drives, walks or roads.
Always be alert for hazards such as rocks, metal objects and other debris which may be thrown or entangled by mower blades. Watch out for holes or deep depressions.
Inspect area to be mowed for hazards such as rocks, metal objects and other debris which may be thrown or entangled by mower blades. Remove these objects before mowing.
Always keep clear of the mower blades and attachments during their operation.
Always maintain a safe distance from people and pets when mowing. Always stop machine if someone enters the area.
Never attempt high speed maneuvering in crowded or congested areas Turn off blades when not mowing.
Never raise the mower deck with the blades engaged to avoid small obstacles, drive over curbs and so forth. Disengage the pto clutch before raising the deck.
Stop the engine before removing the grass catcher or unclogging the discharge chute. Never clear the discharge chute with the engine run- ning. Turn off the engine and be sure the blades have stopped before cleaning. Use a stick to clear a plugged discharge area. Never use your hand!
Follow the manufacturer’s recommendation for wheel weights or counterweights.
Never attempt to back machine onto transport trailer with mower deck or attachment in the raised position.
Clean flammable material from machine. Prevent fires by keeping the mower deck clean of accumulated trash, grass clippings, and other debris.
|
| |
|
|
| |
|
|
|
| |
|
|
| |
| |
|
|
| |
|
|
|
|
| |
|
|
| |
| | |
|
| |
| |
1. | Gauge wheel assemblies | 5. | Deck carrier arm |
2. | Discharge chute | 6. | PTO shaft |
3. | Gearbox | 7. | Rear height adjustment |
4. | Front height adjustment | 8. | |
|
| 9. | Locking pin |
|
| Fig. |
|
109631_0908 |
