601457_1107 5
This safety alert symbol is used to call attention to a message intended to
provide a reasonable degree of PERSONAL SAFETY for operators and other
persons during the normal operation and servicing of this equipment.
DANGER – denotes immediate hazards which WILL result in severe per-
sonal injury or death.
WARNING – denotes a hazard or unsafe practice which COULD result in
severe personal injury or death.
This manual uses two other words to highlight information. IMPOR-
TANT calls attention to special mechanical info rmation and NOTE: empha-
sizes general information worthy of special attention.
All operators and mechanics should read this manual, and be instructed
about safe operating and maintenance procedures. If the operators or
mechanics cannot read and understand English, it is the owner’s responsibil-
ity to explain this material to them.
This machine meets or exceeds the B-71.1-2003 specifications of the
American National Standards Institute, in effect at the time of produc-
tion. However, improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury, comply with
these safety instructions and always pay attention to the safety alert ▲
symbol, which means DANGER or WARNING - “personal safety
instructions.” Failure to comply with the instructions may result in per-
sonal injury or death.
Incorrect usage of this machine may result in severe injury. Personnel
operating and maintaining it should be trained in the proper use and
should read the manuals completely and thoroughly before attempting to
set-up, operate, adjust, or service this machine.
The Quick Reference Decals are designed to give the operator brief infor-
mation needed in the daily operation and service of the machine. These
decals are not intended to be used in place of this manual but instead are to be
used as an extension of this manual. These decals should not be removed or
obliterated. Replace these decals if they become unreadable.
It is the owner’s responsibility to make certain that the operators and
mechanics read and understand this manual and all decals before operating
this machine. It is also the owner’s responsibility to make certain that the
operators and mechanics are qualified and physically able individuals, prop-
erly trained in the operation of this equipment. All operators and mechanics
must become familiar with the safe operation of the equipment, operator con-
trols and safety signs.
Never let children or untrained people operate or service the equipment.
Local regulations may restrict the age of the operator.
The owner/user can prevent and is responsible accidents or injuries occur-
ring to themselves, other people or property.
The owner should also ensure that the operator/mechanic know that they
are responsible for their own safety as well as the safety of other persons
within the vicinity. Remember, the operator is responsible for accidents or
hazards occurring to other people or their property.
SAFETY PRECAUTIONS

Safety and Instruction Decals

▲Specific safety warning decals are located on the equipment near the immediate areas of potential hazards. These decals should not be removed or obliter-
ated. Replace them if they become non-readable.
The following illustrations show the various decals that are located on the machine. A brief explanation, for those requiring one, is shown to help the operator
understand the meanings of these decals.
Avoid skin contact with battery acid.
Always wear eye protection when checking
the battery, acid can cause serious injury
to skin and eyes. If contact occurs, flush
area with clean water and call physician
immediately. Acid will also damage cloth-
ing.
Do not allow open flame near the battery
when charging.
Hydrogen gas forms inside the battery.
This gas is both toxic and flammable and
may cause an explosion if exposed to
flame. Always remove the negative
ground first and replace it last.
Do not overfill battery.
Electrolyte may overflow and damage
paint, wiring or structure. When cleaning
the battery, use soap and water. Be care-
ful not to get soap and water into the bat-
tery. Use soda mixed in water to clean
corrosion off the terminals.
Read Owner’s Manual and Quick Refer-
ence Decal before attempting to operate
this machine.
Do not smoke while refueling.
Do not fill tank with engine running, or
while the engine is hot.
Allow engine to cool before storing
machine inside a building.
Store away from open flame or spark if
there is fuel in tank.
Clean up any gasoline spills.
Do not refuel while in enclosed trailer or
other enclosed areas
Never operate the mower deck with side
deflector damaged, altered, removed or in
raised position, except when the entire
grass catcher attachment or mulching sys-
tem is being used.
Whirling blades! Keep hands and feet
away.
Beware of thrown objects.
Part Number
727016
Part Number
727420
Part Number
727438