110907 01/09 9-7
?Except when changing or checking belt, always keep belt covers on mower for safety as well as cleanliness.
?Stop the engine before removing the grass catcher or unclogging the discharge chute. Never clear the discharge
chute with the engine running. Turn off the engine and be sure the blades have stopped before cleaning. Use a
stick to clear a plugged discharge area. Never use your hand!
?Exercise caution when loading or unloading the machine onto a trailer or truck.
?Always wear safety goggles or safety glasses with side shields when operating the mower.
?Never leave machine unattended with ignition key in switch, especially with children present.
?Be alert and turn the machine off if children enter the area.
?Always wear adequate eye protection when servicing the battery, hydraulic system, cooling system or when grind-
ing mower blades and removing accumulated debris.
?Use extra caution when handling gasoline and other fuels. They are flammable and vapors are explosive.
?Never refuel tractor while engine is running; never refuel near an open flame or near devices which can create a
spark. Refuel outdoors preferably, or in well ventilated areas.
?Never attempt to start engine when there is a strong odor of gasoline fumes present. Locate and correct cause.
?Never run the engine in an enclosed area unless exhaust is vented to the outside. Exhaust gases contain carbon
monoxide which is odorless and deadly poison.
?Never attempt to make any adjustments or repairs to the tractor drive system, mower deck or any attachment
while the tractor engine is running or deck clutch is engaged. Repairs or maintenance requiring engine power
should be performed by trained personnel only.
?Never work under the machine or attachment unless it is safely supported with jack stands. Make certain machine
is secure when it is raised and placed on the jack stands. The jack stands should not allow the machine to move
when the engine is running and the drive wheels are rotating. Use only certified jack stands. Use only appropri-
ate jack stands, with a minimum weight rating of 2000 pounds to block the unit up. Use in pairs only. Follow the
instructions supplied with the vehicle stands.
?Before working on or under the deck, make certain engine cannot be accidentally started. Shut engine off and
remove ignition switch key for maximum safety. Repairs or maintenance requiring engine power should be per-
formed by trained personnel only.
?Use a stick or similar instrument to clean under the mower making sure that no part of the body, especially arms
and hands are under mower.
?Exercise caution when working under the deck as the mower blades are extremely sharp. Wearing gloves or
wrapping the blade(s) is advisable when working around or with the blades.
?Do not touch hot parts of machine.
?Keep nuts and bolts tight, especially the blade attachment bolts. Keep equipment in good condition.
?Never tamper with safety devices. Check their proper operation regularly.
?Grass collection system components are subject to wear, damage and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended
parts, when necessary.
?Use only genuine Hustler replacement parts to ensure that original standards are maintained
Using a ramp?Use extreme caution when loading and unloading a unit with a ramp.
?Use only a single, full width ramp; do not use individual ramps for each side of the unit. Having a full width ramp
provides a surface for the tractor frame to contact if the unit starts to tip backwards. It also reduces the risk of a
wheel going off and the machine tipping over.
?Do not exceed a 15 degree angle between the ramp and the ground or between the ramp and the trailer or truck.
?When on a ramp avoid sudden acceleration
Safety and Instruction Decals?Specific safety warning decals are located on the equipment near the immediate areas of potential hazards.
These decals should not be removed or obliterated. Replace them if they become non-readable.