BioDisk from Hypertec - Quick User Guide

D. Getting Started

D1. Registering Finger Prints (ctd)

Step 3

The Finger Print set-up screen will come up automatically.

Select an un-registered finger from the screen, the finger will be highlighted in green.

Step 4

Once selected, you are asked to enrol a fingerprint. Press the finger firmly onto the sensor and swipe. Each swipe should last 1-2 seconds. Each finger print needs to be swiped successfully 3 consecutive times for enrolment to work. If successful, numbers 1,2,3 will show on the left hand side.

6

Page 7
Image 7
Hypertec BioDisk manual D1. Registering Finger Prints ctd