•Automatic sensing and switching between 10 Mbps or 100 Mbps operation
•Full Duplex. Independent receive and transmit circuits allow full duplex operation at both 10 Mbps and 100 Mbps, allows for maximum throughput of 200 Mbps
•A single
•Platform independent. Supports all type II CardBus PC Card compliant PCs
•Easy installation and configuration
•Wide Network Operating Systems support (Including Windows 98, Windows 95, Windows NT, Novell NetWare and more)
•
•Simultaneous Data/Fax Modem and Ethernet / Fast Ethernet LAN operation
•Compliant with Advanced Configuration and Power Interface ACPI
•Supports modem speeds of up to 56Kbps
•International country support - Certified and approved for use in many countries
•Supports V.90, K56flex*, V.34, V.32 terbo, V.32bis, V.22bis, V.22A/B, V.23, V.21, Bell 212A and 103J data transmission
•
•Flash software upgradeable to future ITU 56K standards
•Supports CCITT V.17, V.29, V.27ter and V.21 ch 2 send and receive fax transmission (Class 1 & 2)
•Increased modem throughput with V.42bis and MNP5 data compression
•Error detection and correction using V.42 LAPM and MNP
•Fax/Modem installed as a COM port, runs extended AT command set
•Automatic Modem sleep mode for longer PC battery life
•16550 UART
•Card and Socket Services support
•Direct Enablers to reduce memory requirements included
•Advanced Wizard Utility for easy, straightforward installation