Hyundai H-CDM8022 USB/SD/MMC operations

21

USB/SD/MMC operations

Loading SD/MMC Card

Insert the SD/MMC card into the slot. The unit will switch to MEM-CARD mode automatically and the LCD will

show “CARD”. SD icon will appear on the LCD.

Take out SD/MMC Card

Push MODE button and switch to non MEM-CARD mode, then push SD/MMC card and take out the card when part

of the card flip up.

Loading USB equipment

Open the rubber cap; put the USB into the connector. The unit will switch to USB mode automatically, and the LCD

will show “USB”. USB icon will appear on the LCD.

Take out USB equipment

Push the MODE button and switch to non USB-DRIV mode, then take off the USB equipment, close the rubber cap.

Note: All the file operations in USB-DRIV mode and in MEM-CARD mode are performed in the same way as

DISC mode.

Contents

Main H-CDM8022 Table of contents Important safeguards Installation/Connections Electrical connections Using the ISO Connector Panel controls Front panel Page Back of the front panel Remote controller (RC) Battery information of RC General operation Page Page Digital tuner Band selection Manual/automatic tuning Programming tuner stations AF function (Alternative Frequencies) TA (Traffic Announcements) function EON (Enhanced Other Networks) PTY (Program Type) function Disc operations Page Direct track search (for WMA/MP3) Navigation search (for WMA/MP3) Direct character search (for WMA/MP3) Page USB/SD/MMC operations Bluetooth operations Page Anti-Theft System Removing the panel Install the panel Remove the unit Handling discs Cleaning Cleaning the cabinet Cleaning discs Troubleshooting guide Symptom Cause Solution Specification Page / Page ISO Page () : Page Page / AF ( ) TA ( ) EON ( ) PTY ( ) Page Page ( WMA/MP3) ( WMA/MP3) ( WMA/MP3) USB/SD/MMC Bluetooth Page Page - Page Page