Hyundai 21 Series, SKT15 manual Fanuc 0i-T

Specification

Specifications

MAIN

SUB

ii

SKT15/21 Series

Controller

FANUC 0i-T

Controls	Controlled Axes	2(X, Z) axes. (Max. 4 axes are available)	Max. 4(X, Z, B and C) axes
	Simultaneous Controllable Axes	2 axes / Linear and circular. (Max. 4 axes)	Max. 4(X, Z, B and C) axes / Linear and Circular
	Least Input Increment	X axis : 0.001mm (0.0001 )
		Z axis : 0.001mm (0.0001 )
		C axis : 0.001deg.
	Least Command Increment	X axis : 0.001mm (0.0001 )
		Z axis : 0.001mm (0.0001 )
		C axis : 0.001deg
Spindle Functions	Spindle Speed Command	S5 digits, Binary Output
	Spindle Speed Override	50% ~ 150% (10Steps)
	Spindle Orientation (1 Position)	Provided
Programming Functions	Maximum Programmable Dimensions	+/- 9999.9999
	Interpolation Functions	Positioning/ Linear/ Circular (G00/G01/G02/G03)
	Cylindrical Interpolation	-	Provided
	Absolute and Incremental Command	G90 ~ 91
	Constant Surface Speed Control	G96 SXXXX
	Decimal Point Input	Provided
	Direct Drawing Dimension Programming	Provided
	Miscellaneous Function	M2
	Canned Cycle : G90, G92, G94	Turning, Threading, Facing
	Multiple Canned Cycle : G70 ~ G72, G74 ~ F76	Finish, Rough, Peck Drilling, Grooving, Threading
	Multiple Canned Cycle : G80 , G83, G83 ~ G88	-	Deep Hole Drilling, Tapping and Boring for X & Z
	Rigid Tap	-	Provided
	Program Stop	M00, M01
	Program End	M02, M30
	Programmable Data Input (G10)	Provided
Feed Functions	Manual Jog Feed : Rapid, Jog, Feed, Handle	Provided
	Manual Handle Feed-rate	x1, x10, x100
	Feed Command	F code Feed-rate Direct Command
	Feed-rate Override	0 ~ 200% (21 Steps)
	Jog Override	0 ~ 2,000mm/min [79 ipm] (21 Steps)
	Rapid Traverse Override	F0, F5, F25/F50, F100%
	Override Cancel	Provided
	Dwell	G40, 0 ~9999.9999 sec
	Manual Continuous Feed	Simultaneous, 1 Axis
	Jog- Handle (Same Mode)	Provided
	Incremental Feed	X1-1000
Reference Functions	Manual Reference Point Return	Provided
	Automatic Reference Point Return	G28, g29
	Reference Point Return Check	G27
	Second Reference Point Return	G30