Hyundai IT E425D, E426D, E465D, E466D - page 63

60
HYUNDAI FULL HD LCD TV
SETUP
How to Set the Geometry in PC Mode
This function is only available in PC mode.
1
2
3
4
5
Press Menu button.
Menu item appear on the screen.
Press Up or Down button to move to setup.
Press or button to select setup.
Press Up or Down buttons to move to “PC”.
Press or button to select “PC”.
Press Up and Down buttons to move to
“Auto Adjustment”.
Press or button to adjust H/V-position auto.
Press Up and Down buttons to move to “TRACKING”.
After pressing OK button, you can select Phase,
Clock with Up or Down button and change the value
with Left or Right button.
Press Up or Down button to move to position.
Press or button to select position.
Press Up and Down buttons to adjust V-position .
Press or button to adjust H-position.
After setting press button to exit
Press MENU button after the setting is done and menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
H. POSITION : To adjust the horizontal position of the picture.
V. POSITION : To adjust the vertical position of the picture.
6
If the display input signal (resolution) has been changed, the picture will be automatically optimized.