I/OMagic PC PVR User’s Guide - 10 -
Hardware Installation To install the I/OMagic PC PVR video capture card in your computer, follow
these steps:
1 Turn off your computer, monitor, and other peripherals
You may also need to disconnect your power cord and other devices
from the rear panel of your computer.
Electronic components are sensitive to static
electricity. To prevent damage, discharge any static
electricity from your body by touching any known
grounded metal surface, such as your computer’s
chassis, before and during installation of hardware.
2 Remove the computer cover
Locate and remove any screws that hold the cover in
place.
Gently remove the cover, leaving the base of the unit
in place. You may need to wiggle the cover back and
forth to loosen it. Do not use excessive force.