Completing the installation

To complete the installation, complete the following steps:

1. Reinstall the cover. See “Installing the cover” for more information.
2. Install the server in the rack cabinet. See the Rack Installation Instructions that
come with the server for detailed information about how to install the server in a
rack cabinet.
Attention:
v Install the server only in a rack cabinet that has perforated doors.
v Do not leave open space above or below an installed server in the rack
cabinet. To help prevent damage to server components, always install a filler
panel to cover the open space and to help ensure proper air circulation. See

the documentation that comes with the rack cabinet for more information.

3. Connect the cables and power cords. For more information, see “Connecting

the cables.”
4. Update the server configuration. See “Updating the server configuration” on

page 39 for more information.

Installing the cover

To install the cover, place it into position and slide it forward.

Connecting the cables
The following illustrations show the locations of the input and output connectors on
the front and rear of the server.
Front
USB 1 connector
USB 2 connector
38 IBM System x3250 M2 Types 4190 and 4194: User’s Guide