not have a backup copy of the current system

partition,

but you have

the

option

diskettes, go to st

8 on

page 101.

 

 

 

 

7. SelectCopy an

option

diskette

from

the

Main Menu.

When

the

 

 

 

 

 

INSERT

YOUR

OPTION

DISKETTE

 

 

 

message appears, insert the backup copy of the

 

 

system partition and follow the instructions on the

 

screen. (The backup copy of

the

system

partition

is

used to reinstall the option files onto the system

 

partition.) Then

go to

step 9.

 

 

 

 

 

 

 

 

8. SelectCopy an option diskette

 

and

follow

the

 

 

 

 

 

instructions on the screen. Repeat

the

procedure

 

 

with each option diskette until

all

option

diskettes

 

have

been

reinstalled.

 

 

 

 

 

 

 

 

 

 

 

9. If thereis a customized configuration installed

 

 

 

(settings have been changed via the “Change

 

 

 

configuration” screen),

continue

with

step

10.

If

there

is nota customized configuration installed,

go

to

step

11.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10. SelectSet configuration

 

from

the

Main Menu. When

 

 

 

you

exit Setfromconfiguration

 

by

pressingF3

,the

 

 

 

 

the

customized

 

configuration

files

will

be

restored

onto the system partition as

files

 

@CMOS

and

 

 

 

@NVRAM.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning:

Do

not

Runrunautomatic

configuration

 

 

 

 

 

 

 

now or you will write over the customized

 

 

 

configuration.

 

 

 

 

 

 

 

 

 

 

 

 

 

11. You are finished with

the

updating

process. Make

a

new

backup

copy

of the

system

partition. (For

 

 

information on making a backup

copy,

see “Making

a

 

 

System Partition

Backup

Copy.”)

 

 

 

 

 

 

 

 

Making

a

 

System

Partition Backup

 

 

 

 

 

 

 

 

Copy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

You

might

need

two

blank

2.0MB

diskettes

(or

the

 

old

backup

copy).

 

 

 

 

 

 

 

 

 

1. Power-off the

computer, then

power

it

on.

 

 

 

2. After the cursor moves to the

upper

right

corner of

screen,

pressCtrl +Alt +Insert.

 

 

 

 

 

 

 

 

 

3. When the Main Menu appears, select

 

 

 

 

 

Backup/Restore

 

system

programs

,

then

select

 

 

 

 

Backup

the

system

partition.

 

 

 

 

 

 

 

 

 

4. Insert a blank 2.0MB

diskette

into

the

diskette drive

and

follow

the

instructions

on

the screen.

 

 

 

Note:

If

you receive a message indicating that the

 

 

 

diskette

is

full,

and you are not prompted to

 

 

 

insert

a

second

diskette,

this

means

that

you

 

 

 

will

not

be

able

to make a backup copy of the

 

 

 

entire system partition. The user

should

keep

 

 

 

the system diskettes and option diskette as a

 

 

 

backup

of

these

files.

 

 

 

 

 

 

 

 

 

 

 

ThinkPad

700,

700C,

720,

720C

(9552)101