18 iSeries and AS/400e System Builder
#2811 #2811 PCI 25 Mbps UTP ATM IOA
The #2811 PCI 25 Mbps UTP ATM IOA provides attachment into an ATM network using Unshielded Twisted Pair (UTP)
cabling. The #2811 is typically used where 25 Mbps speeds are required over distances of less 100 meters. Technical
specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
High-speed PCI slots required: One
The #2811 is a Customer Install Feature for an MES that only includes CIF features.
#2812 #2812 PCI 45 Mbps Coax T3/DS3 ATM IOA
The #2812 PCI 45 Mbps Coax T3/DS3 ATM IOA provides attachment into an ATM network using coax cabling and the
T3/DS3 interface. The #2812 is typically used where 45 Mbps speeds are required over distances of less than 1000
meters. Technical specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
High-speed PCI slots required: One
The #2812 is a Customer Install Feature for an MES that only includes CIF features.
#2815 #2815 PCI 155 Mbps UTP OC3 ATM IOA
The #2815 PCI 155 Mbps UTP OC3 ATM IOA provides attachment into an ATM network using the UTP-5 interface. This
interface is intended for connection to both local area switches and direct connection to service provider equipment.
Technical specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
The #2815 is typically used where 155 Mbps speeds are required over distances of less than 100 meters.
Prerequisite: #7101 or #7102 System Expansion Unit.
High-speed PCI slots required: One
The #2815 is a Customer Install Feature for an MES that only includes CIF features.
#2816 #2816 PCI 155 Mbps MMF ATM IOA
The #2816 PCI 155 Mbps MMF ATM IOA provides attachment into an ATM network using the Multi-Mode Fiber (MMF)
62.5 micron interface. This interface is intended for connection to both local area switches and direct connection to
service provider equipment. Technical specifications and industry standards supported are available at the ATM Forum
Web site at:
http://www.atmforum.com
The #2816 is typically used where 155 Mbps speeds are required over distances of less than 2 kilometers.
Prerequisite: #7101 or #7102 System Expansion Unit.
High-speed PCI slots required: One
The #2816 is a Customer Install Feature for an MES that only includes CIF features.
#2818 #2818 PCI 155 Mbps SMF OC3 ATM IOA
The #2818 PCI 155 Mbps SMF OC3 ATM IOA provides attachment into an ATM network using the Single Mode Fibre
(SMF) 9 micron interface. This interface is intended primarily for direct connection to service provider equipment, but can
be used for local area switches. Technical specifications and industry standards supported are available at the ATM
Forum Web site at:
http://www.atmforum.com
The #2818 is typically used where 155 Mbps speed is required over distances of 16 to 40 kilometers.
Prerequisite: #7101 or #7102 System Expansion Unit.
High-speed PCI slots required: One
The #2818 is a Customer Install Feature for an MES that only includes CIF features.
#2819 #2819 PCI 34 Mbps Coax E3 ATM IOA
The #2819 PCI 34 Mbps Coax E3 ATM IOA provides attachment into an ATM network using coax cabling and the E3
interface. The #2819 is typically used where 34 Mbps speed is required over distances of less than 1000 meters.
Technical specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
High-speed PCI slots required: One
The #2819 is a Customer Install Feature for an MES that only includes CIF features.
#2824 #2824 PCI Feature Controller (LAN/WAN/Workstation)
The #2824 can be used for attaching LAN, WAN, and Workstation IOAs to the system. Refer to the #2824 description
within “Workstation controllers” on page12 for full information about this controller.