Chapter 1. IBM AS/400e 170 models 17
#9745 #9745 Base PCI 2-Line WAN IOA
The #9745 two-line communications adapter supports ECS and Client Access Console or Client Access Console. One
of the following cables must be specified for ECS:
#0348 V.24/EIA232 20-ft. (6 m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0353 V.35 20-ft/6 m PCI cable
#0354 V.35 50-ft/6 m PCI cable
#0355 V.35 80-ft/6 m PCI cable
#0356 V.36 20-ft/6 m PCI cable
#0358 V.36 150-ft/45 m PCI cable
#0359 X.21 20-ft/6 m PCI cable
#0360 X.21 50-ft/15 m PCI cable
#0365 V.24/EIA 232 80-ft/24 m PCI cable
#0367 Operations Console PCI Cable 20 ft (6 m) *
A #9745 must be used for Client Access Console:
#0362 20-ft (6 m) Client Access Console Cable (support only with OS/400 V4R4)
* The #0367 is used to support the Operations Console function (default):
#0367 Operations Console PCI Cable 20-ft (6 m). Required unless #2746 PCI Twinaxial Workstation IOA is used.
#0362 and #0367 are mutually exclusive.
The #0381 Remote Control Panel Cable can be used to support the Remote Control Panel function. The #0381 cable
does not attach to a communication port.
PCI card slots required: One (low or high-speed)
When the #9745 is installed in slot C03, the #9724 PCI Token Ring IOA must be removed from the base system unit and
moved into a #7101 System Expansion Unit, except for the #2289 processor.
The #9745 is mutually exclusive with the #9720 and #9721.
Minimum operating system level: OS/400 V4R3
LANs and ATM
Comm.
Restrictions
See “Comm. Restrictions” on page 103, for communications rules and restrictions.
#2723
#9723
#2723 PCI Ethernet IOA
The #2723/#9723 provides a single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area
Network. Consists of an adapter card and internal code which supplies Ethernet Version 2 and IEEE 802.3 Media Access
Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. Has a RJ45 connector and a 15 pin D-shell
connector for attachment of customer supplied cabling. The Ethernet/IEEE 802.3 IOA is capable of operating in half or
full duplex mode. AUI Ethernet or RJ45 twisted pair cable must be ordered separately. Cabling must meet or exceed
Industry Standard EIA/TIA T568B.
The #9723 is a base LAN.
If #9723/#2723 PCI Ethernet IOA is selected to run on #2857 Integrated PC Server/#2866 PCI Integrated Netfinity
Server, then one #0221 Ethernet on Integrated PC Server or Integrated Netfinity Server is required for each
#2723/#9723 installed.
PCI slots required: One
The #2723 is a Customer Install Feature for an MES that only includes CIF features.
#2724
#9724
#2724 PCI 16/4 Mbps Token Ring IOA
The #2724/#9724 provides a single attachment to a 16 Mbps or a 4 Mbps Token Ring Network. It consists of an adapter
card, internal code that supplies IEEE 802.5 MAC and IEEE 802.2 LLC functions and an external 8-ft (2.4 m) cable.
Alternatively a twisted pair cable for attachment to the RJ45 connector on the IOA can be ordered separately. The #9724
is a base LAN. If the #2724/#9724 PCI Token Ring IOA is selected to be run on a #2857 Integrated PC Server/#2866
PCI Integrated Netfinity Server, then one #0220 Token Ring on Integrated PC Server or Integrated Netfinity Server is
required for each #2724/#9724. The IOA is capable of operating in half or full duplex mode.
PCI slots required: One
The #2724 is a Customer Install Feature for an MES that only includes CIF features.
#2809 #2809 PCI LAN/WAN/Workstation IOP
The #2809 can also be used in the #7101 System Expansion Unit to attach LAN, WAN, and Workstation IOAs to the
system.
Refer to the #2809 description in “Workstation controllers” on page12 for full information about this controller.