Chapter 1. IBM AS/400e 170 models 15
#2745 #2745 PCI 2-Line WAN IOA
The #2745 supports up to two multiple protocol communications ports when one or two of the following cables are
attached:
#0348 V.24/EIA232 20-ft. (6 m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0353 V.35 20ft/6 m PCI cable
#0354 V.35 50ft/6 m PCI cable
#0355 V.35 80ft/6 m PCI cable
#0356 V.36 20ft/6 m PCI cable
#0358 V.36 150ft/45 m PCI cable
#0359 X.21 20ft/6 m PCI cable
#0360 X.21 50ft/15 m PCI cable
#0365 V.24/EIA 232 80ft/24 m PCI cable
Restrictions apply using the #2745. See “Comm. Restrictions” on page 103 for communications rules and restrictions.
PCI slots required: One (low or high-speed).
Minimum operating system level: OS/400 V4R3
The #2745 is a Customer Install Feature for an MES that only includes CIF features.
The #2745 was withdrawn from marketing on 01 October 2004. The recommended replacement is the #2742 2-Line
WAN IOA.
#2750 #2750 PCI ISDN BRI U Adapter (available in the United States and Canada only)
The #2750 PCI ISDN BRI U Adapter is a 4-port (8-channel) ISDN BRI (basic rate) full sized PCI card. Each port consists
of 2B+D configuration. The #2750 is the “U”-bus (2 wire) version of the ISDN BRI PCI card.
The #2750 PCI ISDN BRI U Adapter supports the following protocols:
PPP (communicates with remote analog modems (V.90) as well as with remote ISDN devices)
IDLC
Fax
Four 30-ft (9.3 m) RJ-45 to RJ-45 network cables are shipped with each #2750 feature. For configuration purposes, each
#2750 counts as eight lines (two lines per port) towards the system communication maximums. Allowed in high-speed
slots C03 (base unit), E03, E08, or E09 (system expansion unit). Supports full duplex.
Prerequisite: The #2824 PCI Feature Controller is required for attachment to a system expansion unit,
Requirements: The #2750 requires country (region) certification or homologation.
Full sized PCI card slot.
Maximum: One per IOP.
Minimum operating system level: OS/400 V4R4 with PTF MF22528 or Cumulative PTF Package C9313440.
The #2750 is a Customer Install Feature for an MES that only includes CIF features.
#2751 #2751 PCI ISDN BRI S/T IOA
The #2751 PCI ISDN BRI S/T IOA is a four-port (eight channel) ISDN BRI (basic rate) full sized PCI card. Each port
consists of 2B+D configuration. The #2751 is the “S/T”-bus (four wire) version of the ISDN BRI PCI card.
This requires a network terminating device in the circuit. In the United States and Canada, this must be provided by the
customer. In other countries or regions, it is most likely provided by the telephone company.
The #2751 supports the following protocols:
PPP (communicates with remote analog modems (V.90) as well as with remote ISDN devices)
IDLC
Fax
Four 30-ft (9.3 m) RJ-45 to RJ-45 network cables are shipped with each #2751 feature. For configuration purposes, each
#2751 counts as eight lines (two lines per port) towards the system communication maximums. Allowed in high-speed
slots C03 (base unit), E03, E08, or E09 (system expansion unit). Supports full duplex.
Prerequisite: The #2824 PCI Feature Controller is required for attachment to a system expansion unit,
Requirements: The #2751 requires country (region) certification or homologation.
Full sized PCI card slot.
Maximum: One per IOP.
Minimum operating system level: OS/400 V4R4 with PTF MF22528 or Cumulative PTF Package C9313440.
The #2751 is a Customer Install Feature for an MES that only includes CIF features.