32 iSeries and AS/400e System Builder
#9074 #9074 Base I/O Tower
The #9074 is the “base” I/O tower shipped on the Model SB2. The #9074 supports up to four disk units, when installed in
the SB2, up to two removable media units, one battery backup, and redundant or hot swap power supplies. The #9074 has
a #9943 Base PCI IOP and a #9748 Base PCI RAID Disk Unit Controller. The 11 PCI input/output adapters (IOAs) are
supported (driven) by the base #9943 Base PCI IOP and by #2843 PCI IOPs. The #2790 PCI Integrated Netfinity Servers
and #2791/#2799 PCI Integrated xSeries Server can also support selected LAN cards.
Select two (any combination) of the following HSL cables:
#1460 - 3m Copper HSL Cable
#1461 - 6m Copper HSL Cable
#1462 - 15m Copper HSL Cable
Select one of the following SPCN cables per tower:
#1463 - 2m SPCN Cable
#1464 - 6m SPCN Cable
#1465 - 15m SPCN Cable
#1466 - 30m SPCN Cable
One JTAG-C cable (6 m) is included with the #5077. One #14xx power cord must be specified (geography dependant).
The #9074 is capable of controlling Ultra2 SCSI disk units. The two removable media devices (internal tape or CD-ROM)
are supported by the #9748.
The #9074 was withdrawn from marketing on 01 January 2004.
#9079 #9079 Base I/O Tower
The #9079 is the “base” I/O tower shipped on SB3 models. The #9079 supports up to six disk units when installed in the
#2316 SB3 processor and eight on the #2318 SB3 processor, up to two removable media units, one battery backup, and
redundant or hot swap power supplies. The #9079 has a #9943 Base PCI IOP and a #9748 Base PCI RAID Disk Unit
Controller. The 11 PCI IOAs are supported (driven) by the #9943 Base PCI IOP and by #2843 PCI IOPs. The #2790 PCI
Integrated Netfinity Servers and or #2791/#2799 PCI Integrated xSeries Server can also support selected LAN cards.
Select two (any combination) of the following HSL cables:
#1460 - 3m Copper HSL Cable
#1461 - 6m Copper HSL Cable
#1462 - 15m Copper HSL Cable
Select one of the following SPCN cables per tower:
#1463 - 2m SPCN Cable
#1464 - 6m SPCN Cable
#1465 - 15m SPCN Cable
#1466 - 30m SPCN Cable
One #14xx power cord must be specified (geography dependent). The #9079 is capable of controlling Ultra2 SCSI disk
units. The two removable media devices (internal tape or CD-ROM) are supported by the #9748.
The #9079 was withdrawn from marketing on 01 October 2004.
#9733 #9733 Base HSL Ports - 8 Copper
The #9733 is a base bus expansion card which installs in the SB2 system unit. The #9733 has eight HSL ports.
The #9733 was withdrawn from marketing on 21 November 2003.
#9737 #9737 Base HSL Ports - 16 Copper
The #9737 is a base bus expansion card which installs in the SB3 system unit. The #9737 has 16 HSL ports.
The #9737 was withdrawn from marketing on 21 November 2003.
#9752 #9752 Base HSL Ports - 8 Copper
The #9752 is a base bus expansion card that installs in the system unit of the Model SB2. The #9752 has eight copper
ports and an 540 MHz oscillator, and supports clustering (HSL OptiConnect).
Minimum operating system level: OS/400 V5R1
The #9752 was withdrawn from marketing on 21 November 2003 for new orders. Conversions to feature #9752 remain
available.
#9755 #9755 Base HSL Ports - 16 Copper
The #9755 is a base bus expansion card that installs in the system unit of the Model SB3. The #9755 has 16 copper ports
and supports clustering (HSL OptiConnect).
Minimum operating system level: OS/400 V5R1
The #9755 was withdrawn from marketing on 21 November 2003 for new orders. Conversions to feature #9755 remain
available.