Chapter 2. IBM iSeries SB2 and SB3 models 37
#4710 #4710 PCI Integrated xSeries Server
The #4710 PCI Integrated xSeries Server has a 2 GHz processor and four memory slots. Each server memory slot can
contain one of the following features, providing a total main storage capacity from 1024 MB to 4096 MB.
The feature numbers of the server memory cards are:
#0426 - 512 MB Server Memory
#0427 - 1 GB Server Memory
A minimum of two server memory cards are required and must be installed in identical capacity pairs. On model upgrades
or MES orders, a #4710 can be ordered without memory features if usable supported memory features already exist on
the installed system. The #4710 includes one embedded 100/10 Mbps Ethernet LAN controller, and can support the
following LAN IOAs in combination:
#2744 PCI 100 Mbps Token Ring IOA
#5700 PCI 1 Gbps Ethernet IOA
#5701 PCI 1 Gbps Ethernet UTP IOA
The #4710 can be ordered without any LAN IOA features. When a LAN feature is used in conjunction with a #4710, the
following ordering rules apply:
If a #2744 is driven, then one #0223 100 Mbps Token-Ring Specify is required for each #2744 driven.
If a #5700/#5701 is driven, then one #0226 1 Gbps Ethernet Specify is required for each #5700/#5701 driven.
Up to three IOA LAN features can be supported by the #4710, depending on the system unit/tower position into which
the #4710 is placed.
Native OS/400 functions are not supported.
The #4710 does not support external host LAN. It does not require a #2843, #2844 or #9943 but placement is limited to
specific slots within the system units.
The #4710 requires two PCI card slots, and does not hang over a third slot. It ships with a standard keyboard/mouse splitter
cable and can sup port either standard or USB 1.1 keyboard, mouse, or both. Windows 2000 Server and Windows 2003
Server operating systems are supported. The following apply:
#0325 (IPCS Extension Cable for Windows) is the default (but can be removed).
A minimum of 1 GB server memory is required.
#1700 (IPCS Keyboard/Mouse for Windows) is default (in countries or regions offering it).
A display must be connected to the Integrated Server to support Windows.
For a non-US keyboard/mouse and display, see:
http://www.ibm.com/eserver/iseries/integratedxseries/
The #4710 is supported in the system unit of Models SB2 and SB3
Minimum operating system level: OS/400 V5R2 with PTFs identified in Informational APAR II13609 at:
http://www.ibm.com/eserver/iseries/support
The #4710 was withdrawn from marketing on 01 June 2006. The #4812 PCI Integrated xSeries Server is the recommended
replacement.
Workstation controllers
#4746 #4746 PCI Twinaxial IOA
The #4746 PCI Twinaxial IOA provides support for up to 40 twinaxial displays and printers. A 20-ft (6.2 m) cable with an
eight-port expansion (breakout) box is included with this adapter. Each port supports seven attached devices, allowing for
56 total attached devices, of which only 40 can be active.
Maximum: One.
The #4746 is a Customer Install Feature.
#5540 #5540 System Console on Twinaxial Workstation IOA
A system console specify code had to be selected on each new order.
When #5540 is on the order, the system console device is attached to a #4746 PCI Twinaxial IOA.
#5544 #5544 System Console on Operations Console
A system console specify code had to be selected on each new order. When #5544 is on the order, the system console is
connected to a #0367 Operations Console PCI Cable attached to a #4745 PCI 2-line WAN IOA or a #9771 Base PCI 2-line
WAN with integrated modem.